Installation Of The Device Driver; Installation Of The Secabo Cutting Plotter In Signcut Productivity Pro; Installation Of The Illustrator Export Plugins For Cs2, Cs3 And Cs4 - Secabo C30III Operating Instructions Manual

5.3.1 Installation of the device driver

• Insert the Secabo CIII Driver CD into your CD drive.
• Select the driver necessary for your Mac OSX Version (Intel or power PC) in
the folder Mac OSX/Drivers.
• Activate the .dmg file by clicking on it, and click on the FTDIUSBSerialDriver
file several times.
• Follow the installation steps by entering your user password.
• You are asked to restart your computer, subsequently the device driver is fully
installed.

5.3.2 Installation of the Secabo cutting plotter in SignCut Productivity Pro

• Open SignCut Productivity Pro, and select the button „Plotter".
• Select the manufacturer, device type, and the device like the illustrated notice
/dev/cu.usbserial-ftE2MSR0 and click on OK.

5.4 Installation of the Illustrator Export Plugins for CS2, CS3 and CS4

• Insert the included Secabo CIII Driver CD into your CD- drive.
• Select the file Signcut.aip in the folder MacOSX/Illustrator Export Plugin .
• Copy it into Adobe Illustrator CS3/Additional modules/Tools for example
Adobe Illustrator CS3 .
• Created vector graphics can then be exported directly to SignCut with this
command.
8