• Subsequently the Plugin is active under the menu file/Send to Signcut (see
illustration below).
5.4.1 Import of an .eps file into SignCut Productivity Pro
• Using the menu command Open File you load a vector graphic in .eps
format into SignCut
5.5 Installing and Adjusting the Blade
• Take one of the cutting blades supplied and place it in the blade holder so
that the sharp side extends at the front. The blade is held by a magnet in the
blade holder.
• Adjust the cutting depths by turning the front cap.
• The depth is initially set correctly when you can carefully move your fingertip
across the blade and feel only a light scratching. Since the depth adjustment
for the blade depends on the material, it may be necessary to change it later
(as a rule 0.05 mm to 0.1 mm).
9