Table of Contents
Advertisement
ZN-PTZ202XE-XT Isntallation Guide
6.3. Reset
Perform the following procedures to reset your device:
1.
Press the Reset button for 2 seconds.
2.
Wait for the system to reboot.
6.4. Factory Default
Resetting the device back to the factory default will initialize all parameters including the IP
address back to the factory defaults. To reset back to the factory default;
1. Press reset button and hold.
2. Release the button after 5 seconds.
3. Wait for the system to reboot.
The factory default settings can be inferred as follows:
IP address:
Network mask:
Gateway:
User ID:
Password:
01A.00
192.168.xx.yy
255.255.0.0
192.168.0.1
root
pass
Reset Button Location
15
Advertisement
Table of Contents
Need help?
Do you have a question about the ZN-PTZ202XE-XT and is the answer not in the manual?
Questions and answers