Reset; Factory Default - Ganz PIXELPRO SERIES Installation Manual

PixelPro GXi Series

6.3. Reset

Perform the following procedures to reset your device.
1. Press the reset button for 2 seconds while the device is in use.
2. Wait for the system to reboot.
!
Please do not hold for more than 2 seconds. Otherwise, the camera may be
switched to its Factory Default settings.
Caution

6.4. Factory Default

Resetting the device back to the factory default will initialize all parameters including the IP
address back to the factory defaults. To reset back to the factory default:
1. Press the reset button and hold.
2. Release the button after 10 seconds.
3. Wait for the system to reboot.
The factory default settings can be inferred as follows:
IP address:
i
Network mask:
Gateway:
Note
User ID:
Password:
03-2014-A
ZN-DNT372XE-MPD(-1) Installation Guide
192.168.xx.yy
255.255.0.0
192.168.0.1
root
pass
19