Yamaha YZF-R1 Owner's Manual page 43

1. Projection
2. Seat holder
2. Remove the key.
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Pull up the corners on the rear of
the rider seat as shown, remove
the bolts with the hexagon wrench
located on the bottom of the pas-
senger seat, and then pull the seat
off.
INSTRUMENT AND CONTROL FUNCTIONS
1
2
1. Bolt
2
1. Passenger seat
2. Hexagon wrench
To install the rider seat
1. Insert the projections into the seat
holders as shown, then place the
seat in the original position.
1
1. Projection
2. Seat holder
1
2. Install the bolts with the hexagon
3. Insert the hexagon wrench back
4. Install the passenger seat.
TIP
Make sure that the seats are properly
secured before riding.
3-28
1
1
2
wrench.
into its holder on the passenger
seat.
3