Yamaha YZF-R1 Owner's Manual page 24

INSTRUMENT AND CONTROL FUNCTIONS
 a self-diagnosis device
 a display brightness and shift tim-
ing indicator light control mode
TIP
 Be sure to turn the key to "ON" be-
fore using the "SELECT" and "RE-
SET" buttons, except for setting
the display brightness and shift
3
timing indicator
mode.
 For the U.K. only: To switch the
speedometer and odometer/trip-
meter/fuel consumption displays
between kilometers and miles,
press the "SELECT" button for at
least one second.
Tachometer
1
light control
1. Tachometer
2. Tachometer red zone
The electric tachometer allows the rid-
er to monitor the engine speed and
keep it within the ideal power range.
When the key is turned to "ON", the ta-
chometer needle sweeps once across
the r/min range and then returns to
zero r/min in order to test the electrical
circuit.
NOTICE
Do not operate the engine in the ta-
chometer red zone.
Red zone: 13750 r/min and above
Clock and stopwatch modes
2
1. Clock/stopwatch
To set the clock
1. Push the "SELECT" button and
2. When the hour digits start flash-
3. Push the "SELECT" button, and
ECA10032
4. Push the "RESET" button to set
5. Push the "SELECT" button and
3-9
"RESET" button together for at
least two seconds.
ing, push the "RESET" button to
set the hours.
the minute digits start flashing.
the minutes.
then release it to start the clock.
1