Residual Risks; Package Contents - DeWalt DW621 Manual

maximum diameter MUST be
36 mm, the maximum cutting
depth MUST be 10 mm.
• For slotter cutters, the maximum
shank diameter MUST be 8 mm
and the maximum diameter MUST
be 25 mm.
• For grooved knives, the maximum
shank diameter MUST be 8 mm, the
maximum diameter MUST be
40 mm and the maximum cutting
width MUST be 4 mm.
WARNING: We recommend the use of
a residual current device with a residual
current rating of 30mA or less.

Residual Risks

In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing
– Risk of personal injury due flying particles.
– Risk of burns due to accessories becoming hot
during operation.
– Risk of personal injury due to prolonged use.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
DATE CODE POSITION (FIG. 1)
The Date Code (ff), which also includes the year of
manufacture, is printed into the housing.
Example:
XX XX 2015
Year of Manufacture

Package Contents

The package contains:
1 Router
1 Parallel fence with fine adjustment and
guiderods
1 Collet 1/4" (DW621-XE, DW621 GB, LX)
1 Collet 1/2" (DW621-XE, DW622 GB, LX)
1 Collet 8 mm (DW621 QS)
1 Collet 12 mm (DW622 QS)
1 Guide bush 24 mm
1 Wrench # 17 (DW621 GB, LX, QS)
1 Wrench # 22 (DW621-XE, DW622 GB, LX, QS)
1 Dust extraction plug
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Lock-on/lock-off switch
b. Spindle lock
c. Collet nut
d. Parallel fence locking bolt
e. Guide rods for parallel fence
f. Dust extraction outlet in parallel fence
g. Fine adjuster for parallel fence
h. Parallel fence
i. Locking bolt
j. Router base
k. Finger guard
l. Revolver depth stop
m. Depth stop
n. Depth stop locking bolt
o. Plunge limiter
p. Quick adjuster for depth stop
q. Fine adjuster for depth stop
r. Dust extraction adaptor
s. Speed control dial
t. End lock
INTENDED USE
Your D WALT DW621/DW622 high-performance
E
routers have been designed for professional heavy
duty routing of wood, wood products and plastics.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These routers are professional power tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
ENGLISH
7