Using The Menu; Saving Color Adjustment Settings - Sony UP-D25MD Instructions For Use Manual

SETUP Menu
Item Description
LAMP Sets the operation
of the output tray
indicator.
BEEP Turns the button
operation beep
and the printing
error alarm on or
off.
CLEAN Sets the cleaning
DISP message display
function.
PARAM PRT Prints a list of the
current printer
settings.
FLY PRT Sets the timing at
which to begin
printing
operations.
CLEAN ROL Executes manual
paper feed roller
cleaning.

Using the Menu

1
1
Press the ! POWER switch to turn on the printer.
18
Adjustments and Settings on the Menu
Settings
MODE 1 Ready (OFF) t
Receiving image
(flashing) t
Printing (OFF) t
Ejecting (ON) t
Ejecting finished
(OFF)
MODE 2 Always ON
MODE 3 Always OFF
ON Printer sounds are
turned on.
OFF Printer sounds are
turned off.
ON Displays a message on
the LCD display when
head cleaning is
recommended.
OFF Does not display a
message even when
head cleaning is
recommended.
Press the EXEC button to
execute printing (page 19).
ON Paper begins feeding at
the same time image
data is received from the
computer.
OFF Paper begins feeding
after all image data is
received from the
computer.
Press the EXEC button to
execute manual cleaning
(page 22).
2, 6
3, 4, 5
The backlight on the LCD display lights green, and
the PRINT and ALARM indicators and tray light light
simultaneously before turning off.
2
Confirm that the LCD display is in the ready state
("C0 LA-30," etc.), and then press the MENU button.
3
Press < or , to select a menu ([COLOR] or
[SETUP]).
4
Press M or m to select an item.
5
Press < or , to select a setting.
6
Finish configuring settings, and then press the MENU
button.
The LCD display returns to the ready state.

Saving Color Adjustment Settings

Settings that are configured on the color adjustment menu
can be saved and then loaded again later when needed. Up
to two different color configurations can be saved.
To save a color configuration
1
Press the MENU button.
2
Press < or , to select [COLOR].
3
Press M or m to select items (C-R, M-G, Y-B, SHARP,
DARK, GAMMA, LIGHT, CURVE, or ADVANCE)
in the color adjustment menu and change the desired
settings.
4
Once the settings are configured, press M or m to
select [SAVE COL].
5
Press < or , to select a number (1 or 2) under
which to save the color configuration.
Pressing < or , changes the position of [*] on the
LCD display. Move [*] to the left of the desired
number. Up to two color configurations can be saved
by selecting a different number for each
configuration.
For details about the current color configuration,
check the settings in the [COLOR] menu or print a list
of printer settings. (page 19)
6
Press the EXEC button to save the color
configuration.
7
Press the MENU button to return to the ready screen.
To load a color configuration
1
Press the MENU button.