Factory Default Reset Of Tp-Link Router - TP-Link Archer C7 User Manual

4

Factory default reset of TP-LINK Router

If the device is not accessible from the router setting page, you can reset to the factory default
setting by pressing the reset button:
1. Confirm your TP-LINK router is switched on.
2. Press and hold the [Reset] button with a sharp object for 8 seconds until the System LED
change from slow-flash to quick-flash, then release the [Reset] button and wait for the
router to reboot to its factory default settings.
3. Default Setting:
Username / Password
admin / admin
The WPS/Reset Button is located at the right side of Ethernet Ports.
HKBN_SETUP_ROUTER_TPLINK_ENG_230315
IP Address
192.168.0.1
Factory default reset of
TP-LINK Router
WPS/Reset button
11