TP-Link AC1750 Quick Installation Manual

Quick Installation Guide
AC1750 Wireless Dual Band Gigabit Router
7106505288 REV3.0.0
Connect the Hardware
If your Internet connection is through an Ethernet cable from the wall
instead of through a DSL / Cable / Satellite modem, connect the Ethernet
cable directly to the Archer C7's Internet port.
Internet
Power adapter Modem
Power adapter
Archer C7
1
Turn o the modem,
and remove the backup
battery if it has one.
2
Connect the modem to the
Internet port on your Archer C7
with an Ethernet cable.
3
Turn on the modem, and
then wait 2 minutes for
it to restart.
4
Turn on the Archer C7.
5
Verify that the following LEDs are
on and stable before continuing
with the configuration.
Power System 2.4G 5G Internet
On Flashing Flashing Flashing On/Flashing
Note: If the 2.4G LED and 5G LED are off, please
turn on the Wireless On/Off switch on the rear
panel. And 5 seconds later check the LEDs again.