GE DSR-2000e User Manual page 37

Main Menu → Display Settings → Record Capacity
o
Select ON, to display the amount of time remaining before the hard disk runs out of record
space. The data is displayed near the upper left hand corner of the primary monitor. The unit
displays the Record Capacity with two measures of time, and switches automatically
depending on the amount of time remaining:
•
Days and Hours
•
Hours and Minutes
•
Minutes and Seconds
Use the Jog to select ON or OFF.
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
Main Menu → Display Settings → Archive Status
o
To display the archive status near the upper center of the screen on the primary monitor,
select ON. The unit will display either:
•
ARCHIVE NOT CONNECTED.
•
ARCHIVE READY.
•
ARCHIVE NOT READY.
Use the Jog to select ON or OFF.
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
Main Menu → Display Settings → Last Alarm
o
To display the time and date of the last alarm, near the upper right hand corner of the primary
monitor, select On. The unit will display NONE if there is no previous record of an alarm.
Use the Jog to select On or Off.
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
Main Menu → Display Settings → Record Playback Speed
o
To display the Record or Playback Speed, near the lower right hand corner of the primary
monitor, select On. The unit will display NONE if there is no previous record of an alarm.
Use the Jog to select On or Off.
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
--OR—
--OR—
--OR—
--OR—
OFF
ON
OFF
ON
OFF
ON
OFF
ON