Setting The Clock; Clock And Timer; Cd; Radio - iLive IKBC384S User Manual

CLOCK AND TIMER

Setting the Clock

With the power off, press and hold the Clk Set/Mem button.
1.
The hour on the display will begin flashing.
Press the Tune +/- buttons to adjust the hour.
2.
3. Press the Clk Set button again to adjust the minutes.
The minutes on the display will begin flashing.
4. Press the Tune +/- buttons to adjust the minutes.
Press the Clk Set button to finish setting the time, or wait for
5.
the display to stop flashing.

Setting the Timer

1. With the power off, press the Timer button. The display will flash.

CD

Note: This unit is not compatible with MP3 CDs.
Loading and Playing a CD
1. Open the CD Door.
2. Place a CD into the tray, label side facing up.
Close the CD Door.
3.
Press the Source button to switch to CD mode.
4.
5. Press the Play/Pause button to begin playing the loaded CD.
6. Press the Skip/Tune buttons to cycle through tracks.

RADIO

Radio Reception
An FM Antenna is built into the unit. To improve FM radio reception, adjust the
position of the unit.
Tuning the FM Radio
1. Press the Power button to turn the under cabinet music system on.
2. Press the Source button to switch to FM Radio Mode.
Press the Tune +/- button to tune the radio manually.
3.
Hold down the Tune +/- button to scan for available stations.
4.

BLUETOOTH AND LINE IN

Pairing a Bluetooth Device for the First Time
Power on the unit by pressing the Power button.
1.
Press the Source button to switch to Bluetooth mode. The Pairing Indicator
2.
will flash slowly.
3. Press the Pair button. The Pairing Indicator will flash quickly. When pairing,
remain within 3 feet of the unit.
4. Using the native controls on your Bluetooth device, select the IKBC384 in
your Bluetooth settings to pair.
If your device requests a password, enter the default password 0 0 0 0 .
5.
6. Refer to the user's manual for your specific device for instructions on pairing
and connecting Bluetooth devices.
7. When successfully paired and connected, the Pairing Indicator will be solid.
8. After initial pairing, the unit will stay paired unless unpaired manually by the
user or erased due to a reset of the device.
9. If your device should become unpaired or you find it is unable to connect,
repeat the above steps or press the Pair button to start the pairing process
pairing again.
INTERNATIONAL SUPPORT
To download this User's Guide in English, Spanish, or French, or to get answers to frequently asked
questions, visit the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a
preguntas frecuentes, visite la sección de apoyo en:
www.iLiveElectronics.com
Pour télécharger ce guide de l'utilisateur en anglais, espagnol ou français, ou pour obtenir des
réponses à des questions fréquemment posées, consultez la rubrique d'assistance sur:
www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User's Guide, go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.com
Copyright © 2013 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.
2. Press the Timer buttons to adjust the timer in increments of 10 min.
Press the Tune +/- buttons to adjust the timer in increments of 1 min.
3.
4. Wait for the display to stop flashing.
5. After the set time has expired, the under cabinet music system will
sound an alarm.
Disabling the Timer
To cancel the alarm after it has sounded, press the Power button.
To cancel the timer before the alarm has sounded, press the Timer button until
the display reads 000 and the timer light is no longer lit.
Programming a CD
Press the Stop button to stop the CD during play.
1.
Press the Prog button.
2.
3. "PROG" will begin to blink on the display.
4. Press the Tune +/- buttons to select a track.
Press the Program button to save the selected track to the program.
5.
6. Repeat steps 4 and 5 to program up to 20 tracks.
Saving and Playing a Station as a Preset
1. Tune to the desired station.
2. Press the Clk Set/Mem button.
Preset number will appear on the display.
Press the M +/- buttons to adjust to the desired preset number.
3.
Press the Clk Set/Mem button to save the current radio station to
4.
the selected preset.
5. Press the M +/- buttons to cycle through preset radio stations.
Playing Audio through Bluetooth
1. After successfully pairing to a device, use the native controls on the
connected Bluetooth Device to select a track.
2. To play or pause the selected track, use the native controls on the connected
Bluetooth Device, or the Play/Pause button on the unit.
3. To skip forward or back on the selected track, use the native controls
on the connected Bluetooth Device, or the Skip/Tune +/- buttons
on the unit.
4. Audio played through the connected Bluetooth device will now be heard
through the speakers.
Using the Audio Input
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the Line In Input on the side of the
unit and the audio output on an audio device.
Press the Power button to turn the unit on.
2.
3. Press the Source button to switch to Line In mode.
4. Use the native controls on the connected device to play your audio
through the unit.