Related Manuals for iLive IKBC384S
Summary of Contents for iLive IKBC384S
- Page 1 IKBC384S Thank you for purchasing this Clock Radio. Please read this instruction manual carefully before using this product to ensure proper use. Keep this manual in a safe place for future reference. ...
-
Page 2: Warnings And Precautions
WARNINGS AND PRECAUTIONS Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE:This equipment has been tested and found to comply with the limits for a Class B didited device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection aginst harmful interference in a residential installation. - Page 3 MAIN UNIT CONTROL LOCATION ...
- Page 4 REMOTE CONTROL LOCATION NOTE: Remove spacer tab before using this unit for first time . Press the button of the remote to pointing the main unit remote senor area to fully control the main unitl. INSTALL / REPLACE REMOTE BATTERY TO INSTALLING / REPLCING REMOTE BATTERY 1.
-
Page 5: Install / Replace Backup Battery
INSTALL / REPLACE BACKUP BATTERY This unit equipped with a battery backup circuit that will maintain the time, wake-up alarm settings, as well as radio station preset memory setting in the event of a temporary power failure. TO INSTALL I REPLACE BACKUP BATTERY Make sure the AC adaptor is connected during battery replacement. -
Page 6: Setting The Clock
USING LINE IN (AUX IN) JACK You can play any portable or external audio device with a standard 3.5mm stereo audio cable (not included) via the LINE IN jack on the unit. 1. Plug one end of a standard 3.5mm stereo audio cable into the earphone or line-out jack on your external device and plug the another end of the audio cable into the unit's LINE IN jack. -
Page 7: Listening To Radio
LISTENING TO RADIO TO SET UP ANTENNA Extend FM antenna fully and rotate the unit to the best orientation for the best reception. TO TUNE THE RADIO TO DESIRED CHANNEL MANUALLY Press the button to turn on the unit. Press the SOURCE button to select RADIO mode. -
Page 8: Listening To A Bluetooth Device
4. Turn on the Bluetooth function of your Bluetooth device and enable the search or scan function to find nearby Bluetooth devices. 5. Select “IKBC384S” from the device list when it appears on your device screen. 6. After successfully pairing (linking) with a Bluetooth enabled device, the unit will emit a short beep and the Bluetooth icon will light steadily. - Page 9 LISTENING TO A CD DISC ( Normal Playback ) INSERT AND PLAY A CD DISK After power connect, press the SOURCE button to select CD mode. Press button once that the CD DOOR will auto eject. Carefully insert the disc into the disc compartment (graphic back side) and Press button again that the CD DOOR will auto close.
- Page 10 CARE AND MAINTENANCE OF DISC WARNING! THIS PRODUCT USES A CLASS 1 LASER. AVOID ANY DIRECT EXPOSURE TO THE LASER BEAM. USE OF CONTROLS, ADJUSTMENTS OR PROCEDURES NOT LISTED IN THIS GUIDE MAY RESULT IN HAZARDOUS EXPOSURE. Handing Compact Discs To remove a CD from its storage case, press down on the center of case and lift the disc out.
Need help?
Do you have a question about the IKBC384S and is the answer not in the manual?
Questions and answers
unable to open the CD door wireless under cabinet bluetooth/CD/MP3-CD/USB/radio/music system model IKBC384SMP3Uv2915-01
If the CD tray on the iLive IKBC384S music system won't open, try the following fixes:
1. Check for Obstructions – Ensure there is no disc or debris inside the tray that could be preventing it from opening.
2. Power Cycle the Device – Unplug the system, wait a few minutes, and plug it back in to reset it.
3. Inspect for Damage – If the tray is physically damaged, it may need to be replaced.
4. Manual Eject – Some CD players have a small pinhole near the tray that allows manual ejection using a paperclip.
5. Check Power and Buttons – Ensure the device is receiving power and that the eject button is working properly.
If none of these steps work, the tray mechanism may be faulty and require professional repair or replacement.
This answer is automatically generated
How do I make the clock display brighter?
can you bluetooth your music to a remote sound system with this unit?
No, the iLive IKBC384S is a Bluetooth receiver, not a transmitter, so it cannot connect via Bluetooth to a remote sound system for music playback.
This answer is automatically generated
Why do I have to unplug the device to get it to turn on when I haven't listened to it for a few days?
The iLive IKBC384S may need to be unplugged to turn on after not being used for a few days because the battery backup is only intended for short power outages and cannot run the unit's primary functions. If the unit loses power completely and is not used for a while, it may require a reset by unplugging and reconnecting the AC power cord to restore normal operation.
This answer is automatically generated