Table of Contents
Advertisement
Installing in a side-by-side combination
Joining the two appliances
together
The following fixing parts are supplied:
The following tools are supplied:
r SW 10 spanner
q SW2 allen key (supplied with
stainless steel appliances for
adjusting the height of the hinge
plate)
You will also need the following:
– Spirit level
– Cordless screwdriver
– TX 25 screwdriver
68
^ Before starting, peel off any
protective foil from the appliance
casing.
Installation steps at the front of the
appliances
^ Use spanner r supplied to screw in
feet (for supporting the appliance
doors) a completely. They must not
come in contact with the floor.
^ Fit covers a to the four front feet.
^ Place the appliances next to one
another so that the fronts are aligned,
leaving a gap of 10 mm between
them.
Hide quick links:
Advertisement
Table of Contents
