Table of Contents
Advertisement
Installation
Ventilation
Air at the back of the appliance gets
warm. To ensure sufficient ventilation the
air inlet and outlet must not be covered
or blocked in any way. They should be
dusted on a regular basis.
Appliances with wall spacers
supplied
The wall spacers supplied with
some appliances must be used in
order to achieve declared energy
consumption values. Appliance
depth is increased by approx. 35
mm with the wall spacers fitted. If
the wall spacers are not used, this
does not influence the functionality
of the appliance. Energy
consumption is only minimally
increased if there is little distance
between the appliance and the wall.
^ Fit the wall spacers onto the back of
the appliance on the top left and
right.
64
Installation
^ Remove the cable clip from the back
of the appliance.
^ Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
^ Carefully push the appliance into
position.
^ Position the appliance with the wall
spacers (if used) or the back close to
the wall.
Aligning the appliance
^ To align the appliance, adjust the feet
using the spanner supplied.
^ If necessary, also align the two rear
adjusting devices a using a socket
wrench b.
Turn the adjusting device clockwise
to raise the appliance up at the back.
Hide quick links:
Advertisement
Table of Contents
