1. Manuals
  2. Brands
  3. THUNDER TIGER Manuals
  4. Motorized Toy Car
  5. Tomahawk
  6. Maintenance manual & parts catalogue

THUNDER TIGER Tomahawk Maintenance Manual & Parts Catalogue

1/10 scale nitro powered 4wd off-road buggy series
Hide thumbs
Table of Contents

Advertisement

Quick Links

1/10 SCALE NITRO POWERED 4WD OFF-ROAD BUGGY SERIES
1:10
No.6195-F
This radio control model car is not a toy! Before beginning assembly, please read this manual thoroughly.
The contents are subject to change without prior notice due to product improvements and specificatrion changes.
Maintenance Manual & Parts Catalogue
Introduction
Thank you for purchasing this Thunder Tiger product. This manual contains the steps and instructions required to assemble
your car. Please read this manual completely before attempting to start maintenance. Follow the directions in this manual closely
to reduce problems during operation. We offer online help on our www.acehobby.com or www.thundertiger.com and forums
and our product specialists are ready to take your call if you have any technical questions. Have fun and enjoy the exciting world
of R/C.
TOMAHAWK BX
24
www.thundertiger.com

www.
tiger.com.tw

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Tomahawk and is the answer not in the manual?

Questions and answers

Related Manuals for THUNDER TIGER Tomahawk

Summary of Contents for THUNDER TIGER Tomahawk

  • Page 1 Maintenance Manual & Parts Catalogue Introduction Thank you for purchasing this Thunder Tiger product. This manual contains the steps and instructions required to assemble your car. Please read this manual completely before attempting to start maintenance. Follow the directions in this manual closely to reduce problems during operation.

  • Page 2: Tools Included

    P.14 P.24 STEP11 Installation of Rear End TOMAHAWK BX PART LIST P.16 P.28 STEP12 Installation of Side Guard TOMAHAWK BX OPTION PART LIST P.16 P.34 Tools Included 4-Way Cross Wrench Hex Wrenches 1.5 / 2.0 / 2.5 / 3.0mm Tools Required For Assembly
...

  • Page 3: Manual Format

    Manual Format How to read the instruction manual? Example STEP4 Indicates the assembly step number and the Front Suspension parts that are to be assembled. Displays actual size drawings, and part quantities used. 10x15x4mm All parts, except screws, are identified by its Ball Bearing order numbers.

  • Page 4: Front Differential

    STEP1 Front Differential / Rear Differential 2.5x12mm F/H Philip Machine Screw 8x14x4mm Ball Bearing 3x5mm Washer 5x8mm Washer silicon oil 4.4x0.8mm O-Ring You may also use silicone oil to replace grease for the differentials. Fill up to 80%. We 3x19mm recommend using #7000 silicone oil for the front differential and # 10000 silicone oil for the rear differential.

  • Page 5: Front Axle

    STEP2 Center Unit 3x25mm BT Philip Machine Screw Brake Cam Brake Pad Note Direction This side face forward. Brake Screw 3x6mm BT Philip Machme Screw Top View Brake Disc STEP3 Front Axle 
 
Rear Axle 4x3mm 2.6x1.9mm Set Screw O-Ring 5x11x4mm Ball Bearing E-clip...

  • Page 6: Front Differential Unit

    STEP3 Front Differential Unit
 6mm(L) Ball Stud 14x10.5x0.1mm Diff Shim 3x12mm BT Philip Machine Screw 4x3mm Set Screw Camber Adjustment For Ready Set Camber Linkage For Optional Turnbuckle Linkage Not Recommended Set Up Adjust the backlash with the shims. STEP4 Front Suspension Factory Set-up 3x56mm...
  • Page 7 STEP4 Front Bumper Front Suspension 3x5mm F/H Philip Machine Screw STEP4 For Left Front Suspension 3x12mm BT Machine Screw Marked "R" "R" 10x15x4mm Ball Bearing 6mm(L) Ball Stud Marked "L" "L" Caster Block Bushing Toe Adjustment For Ready Set Steering Linkage For Optional Turnbuckle Linkage In the chassis set, these dog bones have...
  • Page 8 STEP4 Front Suspension 6mm(L) Ball Stud Marked "B-CM-Front" 2x4mm "B-CM-Front" BT Self-Tapping Screw 2.5x20mm Outer Hinge Pin (Front) For Right STEP4 Front Shock Tower Front Suspension 6mm(L) Ball Stud 3x14mm BT Philip Machine Screw Assemble left and right side the same way...

  • Page 9: Rear Differential Unit

    STEP5 Rear Differential Unit
 6mm(L) Ball Stud 3x12mm BT Philip Machine Screw Adjust the backlash Camber Adjustment with the shims. For Ready Set Camber Linkage For Optional Turnbuckle Linkage Not Recommended Set Up 14x10.5x0.1mm Diff Shim Also see P.9 4x3mm Set Screw Roll Medium...
  • Page 10 STEP6 Rear Suspension 6mm(L) Ball Stud 10x15x4mm Ball Bearing Camber Adjustment For Ready Set Camber Linkage For Optional Turnbuckle Linkage In the chassis set, these dog bones have been assembled in one-piece unit. STEP6 Rear Suspension Rear Shock Tower Rear Wing Mount 6mm(L) Ball Stud 3x8mm...

  • Page 11: Shock Absorber

    STEP7 Shock Absorber Attach the shock eyelet onto the shock shaft until it reaches the mark line on 2.5mm the shaft E-Clips Shock Eyelet 4 or 2.8x1.9mm O-Ring Front Shock Shaft Cover the shaft with cloth before griping it with pliers. Rear Shock Shaft Rear x2 Front x2...
  • Page 12 STEP7 Shock Absorber Front Shock Absorbers Rear Shock Absorbers...

  • Page 13: Steering Bellcrank

    STEP8 Steering Bellcrank Top View 6mm(L) Ball Stud Rear Swing Post Screw 5x8x2.5mm Ball Bearing Side View Rear Note direction STEP8 Steering Bellcrank 3x6mm F/H Philip Machine Screw Front Chassis Brace 3x8mm BT Philip Machine Screw Marked "B-ST" "B-ST" 3x18mm BT Philip Machine Screw Marked "B-ST"...

  • Page 14: Steering Servo

    "T" Back Marked "T" for Thunder Tiger stock servo. Find the appropriate servo horn mount for your servo from the chart below. Install the servo horn arm with the stock mounting screw. See the graphic for the correct neutral angle.
  • Page 15 STEP9 Steering Servo / Throttle/Brake Control Servo 3x10mm Note: !!!The use of the servo spacer may very BT Philip Tap Screw W / Washer depending on the manufacturer's stock servo you purchased. Check the servo to see if a spacer is needed. 
...

  • Page 16: Radio Box

    STEP10 Radio Box Battery Holder Batteries are not included in the kit Black to Black Red to Red STEP10 Radio Box Body Clip Antenna Thread antenna cord through the tubing. Must be purchased separately Pay close attention here Hint...

  • Page 17: Installation Of Rear End

    STEP11 Installation of Rear End M3 Lock Nut Rear Suspension 3x10mm F/H Philip Machine Screw STEP12 Installation of Side Guard 3x8mm F/H Philip Machine Screw...
  • Page 18 STEP12 Installation of Radio Box 3x10mm F/H Philip Machine Screw Radio & Servo Tray Unit STEP12 Installation of Rear Brace 3x8mm BT Philip Machine Screw 3x18mm BT Philip Machine Screw Rear Chassis Brace...

  • Page 19: Installation Of Front End

    STEP13 Installation of Front End 3x8mm BT Philip Machine Screw 3x10 mm F/H Philip Machine Screw M3 Lock Nut Front Suspension STEP14 Installation of Center Unit 3x10mm F/H Philip Machine Screw Check O-ring Inside Pay close attention here...

  • Page 20: Installation Of Fuel Tank

    STEP15 Installation of Fuel Tank 3x10mm F/H Philip Machine Screw 2.9x1.8mm O-Ring 3x6mm BT Philip Machine Screw Tube Clip STEP16 Engine Set Engine Assembly Spring Washer 5x8x2.5mm Ball Bearing 5x8mm Washer Washer 3x6mm Socket Hex Machine Screw 3x10mm Socket Hex Machine Screw 3x28mm Socket Hex Machine Screw Pay close attention here...
  • Page 21 STEP16 Installation of Engine Set 3x8mm BT Machine Screw Tighten the screws with one sheet of paper inserted between both gears. STEP17 Fuel Tube Muffler & Fuel Tube 4x4mm 3x10mm Set Screw F/H Philip Machine Screw Pressure Tube M3 Lock Nut Tube clip Cut the silicone tube to 265mm length for the fuel tube.

  • Page 22: Throttle/Brake Linkage

    STEP18 Throttle/Brake Linkage 28mm STEP19 Tire/Wheels Tire insert foam Install the tire onto the wheel. Glue the tire to the wheel with instant glue in four spots around the tire on both sides. Warning: Follow the adhesive instructions for proper use and safety. Wear eye and hand protection. 
...
  • Page 23 STEP20 Fuel Filter Set 2.5x5mm F/H Philip Machine Screw STEP21 Rear Wing 3x8mm Round Tap Screw Cut off excess...

  • Page 24: Body Shell

    STEP22 Tire/Wheels 4x12mm Socket Hex Machine Screw Washer STEP23 5.5mm Body Shell Body Clip 5.5mm 5.5mm Cut off shaded portion Drill holes with the specified diameter Pay close attention here Assemble left and right side the same way...
  • Page 29 TOMAHAWK BX PAPT LIST AD2555 FLYWHEEL COLLET,21 PD1752 CLUTCH BELL,17T PD7712 ANTENNA BAG PD7901 REAR BULK SET PD7902 FRONT BULK SET PD7903 HEX ADAPTER SET PD7904 PD7905 DIFF SPUR GEAR 44T DRIVE PINION SET 13T PD7906 SPUR GEAR SHAFT PD7907...
  • Page 30 TOMAHAWK BX PAPT LIST STEERING SERVO HORN SET PD7923 CHASSIS PD7924 FR SHOCK SET RR SHOCK SET PD7922 PD7925 6.8 COILS SHOCK BODY SET SHOCK SHAFT SHOCK SPRING OUTDRIVE CUPS PD7926 PD7927 PD7928 PD7929 SPUR GEAR 43T BUMPER FRONT WHEEL (BLACK)
  • Page 31 TOMAHAWK BX PART LIST PD9051 DIFFERENTIAL CASE PD9065 PD9064 CTR DIFF. COVER CTR DIFF. MOUNT PD9055 DIFFERENTIAL GEAR SET DISC BRAKE SET FLY WHEEL CLUTCH SHOE SET STEERING BLOCK SET PD9066 PD9068 PD9070 PD9077 SUSP.ARM MOUNT BUSHING SWING POST SCREW...
  • Page 32 TOMAHAWK BX PART LIST PD7949 CLEAR BODY W/D PD7948-Y PAINTED BODY SET (YELLOW) PD7950 DECAL SET PD7948-R PAINTED BODY SET (RED) PD6307 M3x6B (20) PD1569 2.5mm(20) PD7475 M3x10B (20) PD0962 M4x3B (20) PD1244 3mm (10) PD0978 4mm(20) PD9123 M3x28B (10)
  • Page 33 TOMAHAWK BX PARTS LIST PART# DESCRIPTION NOTE FLYWHEEL COLLET,21 AD2555 CLUTCH BELL,17T PD1752 PD7712 ANTENNA BAG REAR BULK SET PD7901 FRONT BULK SET PD7902 HEX ADAPTER SET PD7903 DRIVE PINION SET 13T PD7904 PD7905 DIFFERENTIAL SPUR GEAR 44T SPUR GEAR SHAFT...
  • Page 34 TOMAHAWK BX PARTS LIST PART# DESCRIPTION NOTE MUFFLER PD9096 SILICONE TUBING PD9097 PD9098 MANIFOLD SHOCK ACCESSORIES PD9102 SHOCK EYELET PD9103 BALL STUD PD9104 BALL STUD PD9105 PD9106 THROTTLE / BRAKE LINKAGE SET THROTTLE / BRAKE SERVO HORN SET PD9108 PD7932...
  • Page 35 TOMAHAWK BX OPTION PART LIST CFRP-CARBON FIBER REINFORCED PLATE RR TOE PLATE SET PD7713 LONG HEX ADAPTER PD7951-T FR WHL 33mm (ORANGE) PD7952-W FR WHL 33mm (WHITE) PD7952-O 2 /3 RR WHL 43mm (WHITE) FR WHL 33mm (YELLOW) PD7953-O RR WHL 43mm (ORANGE)
  • Page 36 TOMAHAWK BX OPTION PART LIST FOR NON-PULL START ENGINE FOR NON-PULL START ENGINE PD9146 CFRP BULK LOWER COVER PD9150 LIGHTENED ENGINE MOUNT PD9151 FLYWHEEL PD9156 HEX WHEEL CAP SCREW NO.1340 ROTATING CAR STAND...
  • Page 37 CFRP-CARBON FIBER REINFORCED PLATE PART# DESCRIPTION NOTE PD7713 LONG HEX ADAPTER PD7951-T REAR TOE PLATE SET 2 /3 2 /3 PD7952-W FRONT WHEEL 33mm (WHITE) PD7952-Y FRONT WHEEL 33mm (YELLOW) PD7952-O FRONT WHEEL 33mm (ORANGE) PD7953-W REAR WHEEL 43mm (WHITE) PD7953-Y REAR WHEEL 43mm (YELLOW) PD7953-O...

Table of Contents

Save PDF