How To Start Collective Operation - Sanyo SHAKC64AGB Instruction Manual

System Controller

How to Start Collective Operation

To start collective operation (ALL or ZONE)
1
2
7
3
Power
1
2
3
4
5
6
7
Stop
Turn the power supply switch on 5 hours or more before starting operation.
Press the SELECT button and select ALL or ZONE.
In case of ZONE collective operation.
Select the ZONE No. to be operated by pressing ZONE button.
Press the ON button.
Set the operation mode by pressing the MODE button.
Set the desired temperature by pressing one of the temperature setting buttons
Set the desired fan speed by pressing the FAN SPEED button.
Select the control mode.
Confirming the ZONE No. to be selected or ALL indication, press the OFF button.
NOTE
In the ALL or ZONE mode, no fl ap setting can be performed. If necessary, you should
select the GR mode and use the FLAP button.
.
3
Stop
4
5
6
.