Table of Contents
Advertisement
Available languages
Available languages
FILTER REPLACEMENT
- Check that the 'front' side of filters are in the correct direction.
- To maintain optimal performance of the product, use original Coway filters.
Tips
- Always unplug the air purifier before replacing filters.
Filter Cleaning and Replacement Cycles
Filter
Pre-filter
Deodorization filter
True HEPA filter
-
Each service life is based on 8-hour use in maximum air speed.
-
The recommended filter replacement cycles may differ depending on the operating
environment.
Resetting the Filter Replacement Indicator
1. Reset indicator blinks when the filter needs to be replaced.
2. Odor LED : Deodorization Filter
HEPA LED : True HEPA filter
3. The pollution level indicator will not turn on if the filter replacement
indicator is activated.
4. After replacing filter, push the Reset button for 2 seconds.
Forcible Reset Mode
When you have replaced a filter before the filter replacement cycle is reached, you can forcibly
reset the filter replacement cycle back to the factory default setting.
1. When the reset function is not activated, press and hold the reset button for 2 seconds.
2. Press the reset button to select the desired filter to forcibly reset.
Press once : Odor LED (Deodorization Filter)
Press twice : HEPA LED (True HEPA Filter)
3. After you select the filter to reset, press and hold the reset button for 2 seconds. And then,the
accumulated time in electronic time counter is erased.
-
If there is no input for 10 seconds in forcible reset mode, the reset mode is cancelled.
Cycles
Every 2~4 weeks
Every 6 months
Every 1 year
Method
Cleaning
Replacement
Replacement
2 seconds
12
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the AP-1512HH and is the answer not in the manual?
Questions and answers
I need a new **** housing for coway AP-1512HH(W)
Air sensor reset not working. In auto it stays at 3 continually. When I tried the rest the sensor after cleaning it, holding the speed button for two seconds, it never flashes
To reset the air sensor on the Coway AP-1512HH when it stays at level 3, follow these steps:
1. Press and hold the speed button and Ionizer button for two seconds.
2. You will hear a beep in 1-second intervals, and the speed indicator will blink.
3. Adjust the sensor sensitivity by pressing the speed button. The first sensitivity level is the most sensitive.
4. Once the desired level is set, press and hold the speed and Ionizer buttons for two seconds to resume normal operation.
If the sensor remains at level 3, try switching it to the first sensitivity level for better responsiveness.
This answer is automatically generated