Page 1
TEL : +82-31-740-8151~8158 FAX : +82-31-740-8145 SAMSUNG OPTO-ELECTRONICS UK, LTD. • Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey KT16 OPS TEL : +44-1932-45-5308 FAX : +44-1932-45-5325 P/No. : Z6806-0678-01E www.samsungtechwin.com ENGLISH www.samsungcctv.com...
Page 2
The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Page 3
Features Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents Samsung Techwin s will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive.
Contents Precautions Functional Description OSD Menu Organization Dome Camera User Menu Settings Part Names and Functions 1. Camera Settings Body 2. Sequence Setting Camera Holder 3. P/T Setting Camera Holder Connection 4. OSD Setting Camera Holder Initial Setting 5. Alarm Setting 6.
Precautions Installation by unqualified If any unusual odors or smoke comes Do not install the product in too Do not install the camera in persons is not recommended. from the camera, stop using the product. hot or too cold environments. intermittent lighting environments.
Use the SW3 of installation bracket to set the communications protocol. Protocol Baud Rate(BPS) Samsung 9,600 Samsung 19,200 Pelco-D 2,400 Pelco-D 4,800 Pelco-D 9,600 Pelco-P 4,800 Pelco-P 9,600 Samsung Elec. 9,600 Samsung Elec. 19,200 Panasonic 9,600 Panasonic 19,200 Vicon 4,800 Vicon 9,600 Honeywell 9,600 4,800 Bosch 9,600 Notes •...
Page 8
ID = 49 ID = 2 ID = 50 ID = 3 ID = 51 Protocol Samsung Pelco Samsung Elec. ID = 4 ID = 52 DVR Model ID = 5 ID = 53 ID = 6 ID = 54...
Page 9
Part Names and Functions Camera ID Remarks Camera ID Remarks Camera ID Remarks Camera ID Remarks ID = 96 ID = 146 D = 196 ID = 246 ID = 97 ID = 147 ID = 197 ID = 247 ID = 98 ID = 148 ID = 198...
Page 10
Part Names and Functions The following 3 Camera ID’s cannot be used. Notes Camera ID R-SW2 R-SW1 • Factory Settings: OFF ID = 0 ID = 160 ID = 175 Setting Communication Method (Camera Holder) Function Setting Transmission Mode (Camera Holder) SW3- #6 Factory Release RS-422...
Page 11
Part Names and Functions Controller Connection Terminal (Camera Holder) Setting Termination Resistance In order to prevent signal reduction, the termination resistance of the 2 end NAME Purpose units, which are the distant paths for camera and controller to be connected CON7- #1 RXD+ Controller Data Line Connection...
To install and use the SPD-3300, the following cables should be used. • Power Adapter Cable The cable connected to the power input terminal of SPD-3300 is shown below with a rated voltage of AC24V 2.5A. Adapter AC24V, Peak 2.5A)
Controller Connection 2) Indoor Insertion Housing (STH-330PE) 5. Connect the Controller Connection Terminal Terminal This housing is used to attach the speed dome camera to of SPD-3300 and the external Controller. the ceiling for installation. Controller SPEED DOME CAMERA User’s Manual SPEED DOME CAMERA User’s Manual...
Page 14
Installation 3) Indoor and Outdoor Housing (STH-330PI, STH-330PO) Camera Installation (outdoor Housing) This housing is used to install the speed dome camera on the indoor or outdoor 1. Fasten the ceiling mount on the ceiling. wall or ceiling. (For the indoor type, the fan and heater are excluded.) 2.
Page 15
Installation 5. Connect the heater and fan cables within the 9. Connect the housing safety wires to the fixture housing to the fan heater PCB. inside the mount installed on the ceiling. 6. Adjust and make the arrows marked on 10.
Functional Description OSD Menu Organization Defaults Sync Internal Line Lock Line Lock Phase Dome camera can be set up on the OSD (On Screen Display) menu displayed Camera Others Tone on the video monitor by the camera controller. The joystick operations in the Setting Image Adj.
Page 17
Functional Description Defaults Defaults Area5 Power On Reset Cancel Execute Area Name Area6 Factory Default Set Cancel Execute Area Setting Position Area7 Camera Default Set Cancel Execute Initialize ON/OFF Area8 Auto Refresh OFF, 1~7Days Mask1 Initial Position Position ON/OFF Mask2 Status Mask3 Position...
Functional Description Dome Camera User Menu Settings FOCUS • Execution of OSD Menu : In Focus menu, you can set up the focus mode among Auto, Manual or One After checking if the camera is in manual operation mode, press the OSD Menu Shot AF.
Page 19
Functional Description Exposure White Balance The White Balance function corrects the abnormal white colour into the Camera exposure can be controlled. normal white colour under any colour temperature lighting. Camera Setting Exposure Select the mode among ATW, AWC and Manual. ATW is selected by default. Focus Brightness White Balance...
Page 20
Back Light As Samsung’s own SV-III DSP chip technology is adopted, even under excessive When the brightness of the image taken under dark light is under a certain backlight condition, both the object and the background can be displayed clearly level, the AGC (Automatic Gain Control) functions to define whether to control unlike other cameras.
Page 21
Functional Description SSNR (Samsung Super Noise Reduction) Day & Night SSNR function reduces background noise under low light conditions differently The darkness level is detected automatically under low light conditions such as in different modes. The noise reduction effect grows in Off, Low, Middle and at night or under dark light to keep the screen bright and clear.
Functional Description Others 2) Sequence Setting • Sequence Setting Menu Camera Setting Ohter Sepuence Setting Preset Focus Sync INTERNAL White Balance ATW(O) Image Adj Preset Setting Exposure Freeze Swing SEQ Edit Back Light Group SEQ Execute MIDDLE Tour SEQ Clear SSNR MIDDLE PTZ Trace...
Page 23
Functional Description 5. If you want to edit the camera function setup items, go to each item and select it. If Notes you don’t want to edit the items and continue the next step of Preset, press the ESC • After setting sensitivity, you must take a long time test and check if the camera is key and go to the next Preset step.
Page 24
Functional Description Swing SEQ: Swing surveillance can be executed and set up and the data can be Setting : Preset position for swing is selected with the joystick and confirmed with the Execution key. SPD is the moving speed (001-240˚/sec). DWL is the deleted.
Functional Description Replay : The manual operation paths are repeated and replayed. Stop key will stop the 3) P/T Setting replay. * If the operation range is limited using Pan Limit and Tilt Limit, please note that other operations Pan Limit : The moving range in the Pan direction can be limited. beyond the limited operation range are not possible.
Page 26
Functional Description Area Setting : Areas can be indicated. Areas can be designated up to 8. Position : Use the joystick and the Execution key to determine the position for screen operation from the left. Main Menu P/T Setting On/Off : Operation of screen area masking can be determined. Default setting is OFF. Camera Setting Pan Limit Sequence Setting...
Functional Description Image Hold : When moving from one Preset item to another Preset item, the Camera Name : Camera name is set up. Preset image before moving can be held before the camera Main Menu OSD Setting direction reaches to the new Preset position. This function is for Camera Setting Camera ID visual convenience of the monitoring observer and for image...
Page 28
Functional Description Preset Name Area Name : Display of Area Name is set up. • When the Area Name is OFF, the Area Name cannot be displayed. Main Menu OSD Setting Camera Setting Camera ID Main Menu OSD Setting Camera Name Sequence Setting Camera Setting Camera ID...
Functional Description Alarm Out : One of the 2 Alarm Outs corresponds to each Alarm input. 5) Alarm Setting Alarm Setting Alarm Output Alarm Enable : It can be determined whether to enable the alarm setting. Alarm Enable Setting 1 Alarm Input Setting 2 Main Menu...
= 03.06 P/T Setting Camera Default Set P/T Setting DOME VERSION = 00.18 OSD Setting Auto Refresh OFF OSD Setting CON PROTOCOL = SAMSUNG TW Alarm Setting Initial Position Alarm Setting DOME ID = 001 Initialize Initialize CONTROLLER = Duplex-9600...
Product Structure and Installation Product Structure Installation *Other Installations: The outdoor installation accessories, which are sold separately, can be applied in various ways. (See 25 and 26 page for the Ø155 accessories on sale.) SPEED DOME CAMERA User’s Manual SPEED DOME CAMERA User’s Manual...
Page 32
Product Structure and Installation Installation 1 Installation 2 SPEED DOME CAMERA User’s Manual SPEED DOME CAMERA User’s Manual...
* The product design and dimensions may change without previous notice for improvement of performance. Horizontal Rotation Manual/Program • The copyright of this manual belongs to Samsung Techwin Co. Ltd. Horizontal Rotation Speed Manual: 0.5˚ ~ 120˚/s(64 levels) Preset: 0.5˚ ~ 240˚/s(64 levels) •...
Page 34
Detección de imagen de alta precisión Cámara Dome PTZ SPD-3300 Manual de Uso Gracias por comprar una cámara CCD de Samsung. Antes de intentar conectar o utilizar este producto, lea atentamente estas instrucciones y guarde este manual para futura referencia. ESPAÑOL...
Page 35
El relámpago con símbolo de flecha dentro de un triángulo equilátero alerta al usuario de la presencia de "voltaje peligroso" no aislado dentro de la envoltura del producto que podría tener magnitud suficiente como para constituir riesgo de descarga eléctrica. importantes de funcionamiento y mantenimiento (servicio) en la literatura que acompaña a la aplicación.
Page 36
Características Samsung Techwin cuida el medio ambiente en todas las etapas de fabricación del producto para conservar el planeta y está emprendiendo varias acciones para ofrecer a los clientes productos más ecológicos. La marca Eco representa la voluntad de Samsung Techwin de crear productos ecológicos e indica que el producto cumple la directiva EU RoHS.
Page 37
Tabla de contenidos Precauciones de Seguridad Descripción funcional Organización Menú OSD Ajustes del Menú de Uso Cámara Domo Nombre de las partes y funciones 1. Camera Setting Cuerpo 2. Sequence Setting Soporte de la cámara 3. P/T Setting Conexión del soporte de la cámara 4.
Precauciones de Seguridad No se recomienda su Instalación por En caso de olores no usuales o humo procedente No instalar el producto en ambientes No instalar la cámara en ambientes parte de personas no cualificadas. de la cámara, dejar de usar el producto. demasiado fríos o demasiado calientes.
Nombre de las partes y funciones Cuerpo Soporte de la cámara Encender Interruptor de establecimiento 1. Medio/Lleno 2.3.4.5 RS-485/422 6.RS-485/422 Comunicación Interruptor de Energía 7. Ajuste de fábrica 8. RS-232 Energía ON/OFF ( Encendida/Apagada) Entrada de Controlador de Conexión (Programación de fábrica: OFF) ( Apagada) 1.
ID = 3 ID = 51 ID = 4 ID = 52 Protocolo ID = 5 ID = 53 Samsung Pelco Samsung Elec. Modelo DVR ID = 6 ID = 54 ID = 7 ID = 55 SVR-430 9600,19200 9600...
Page 42
Nombre de las partes y funciones ID Cámara Comentarios ID Cámara Comentarios ID Cámara Comentarios ID Cámara Comentarios ID = 96 ID = 146 D = 196 ID = 246 ID = 97 ID = 147 ID = 197 ID = 247 ID = 98 ID = 148 ID = 198...
Page 43
Nombre de las partes y funciones Las tres siguientes ID de Cámara no pueden ser usadas. Nota ID Cámara R-SW2 R-SW1 • Ajuste de fábrica: OFF ID = 0 ID = 160 ID = 175 Ajuste de Método de Comunicación(Soporte Cámara) Función Ajuste de Modo de Transmisión (Soporte Cámara) SW3- #6...
Page 44
Nombre de las partes y funciones Controlador de Conexión con la terminal (Soporte Cámara) Ajuste de Resistencia de Interrupción Con el objetivo de prevenir una reducción de la señal, la resistencia de finalización Nombre Objetivo de dos unidades finales, las cuales son las diferentes trayectorias para la cámara SW3 - #1 RXD+ Controlador Conexión Línea de Datos...
1 Clavija para sujetar el cable El cable conectado a la terminal de salida del vídeo y al monitor de SPD-3300 es el cable BNC que se muestra a continuación. Productos vendidos separadamente Los siguientes productos se venden por separado.
Page 46
4 veces el peso total del producto incluidos la cámara de velocidad domo ( SPD-3300) y la estructura de instalación. 2. Después conectar el otro extremo del - Instalar la cámara en un lugar que tenga más de 500 Mm. de espacio encima conector a la terminal de entrada de de la placa de cubierta.
Page 47
Instalación 3) Cubierta Interior y Exterior (STH-330PI, STH-330PO) Instalación de la Cámara (Cubierta Exterior) Esta cubierta se usa para instalar la Cámara velocidad domo en el techo o 1. Sujetar el montaje de la cubierta en el techo. pared interior o exterior. (Para el tipo interior, se excluyen el ventilador y calentador) 2.
Page 48
Instalación 5. Conectar los cables del ventilador y calefactor 9. Conectar los cables de seguridad de la cubierta dentro de la cubierta al calentador ventilador al punto fijo dentro del montaje instalado PCB. en el techo. 6. Ajustar y poner las flechas marcadas en el 10.
Descripción funcional Organización del menú OSD Defaults Sync Internal La cámara Domo puede ser establecida en el menú OSD (Visualización en Pantalla) Line Lock Line Lock Phase Camera visualizado en el monitor del vídeo por el controlador de la cámara. Las operaciones Others Tone Setting...
Page 50
Descripción funcional Defaults Defaults Area5 Power On Reset Cancel Execute Area Name Area6 Factory Default Set Cancel Execute Area Setting Position Area7 Camera Default Set Cancel Execute Initialize ON/OFF Area8 Auto Refresh OFF, 1~7Days Mask1 Initial Position Position ON/OFF Mask2 Status Mask3 Position...
Descripción funcional Ajustes de Menú de Usuario Cámara Domo Focus • Ejecución del menú OSD En el menú de Enfoque, puede ajustar el modo de enfoque de entre Auto, Tras comprobar si la cámara está en modo de operación manual, presionar la Manual o One Shot AF.
Page 52
Descripción funcional Exposure White Balance La función de White Balance corrige el color blanco anormal a color blanco La exposure de la cámara puede ser controlada. normal bajo cualquier temperatura de color o alumbrado. Seleccionar el modo Camera Setting Exposure entre ATW, AWC y Manual.
Page 53
Back Light nivel, las funciones AGC (Aumento de Control Automático) definen si controlar Como el propio chip de tecnología de Samsung SV-III DSP es adoptado, incluso la Gama automáticamente o no. bajo condiciones de excesiva luz trasera, tanto el objeto como el fondo pueden ser visualizados con claridad a diferencia de otras cámaras.
Page 54
Descripción funcional SSNR (Super Reducción de Sonido Samsung ) Camera Setting Camera Setting Focus Focus La función SSNR reduce los ruidos de fondo bajo condiciones de luz oscura de White Balance ATW(O) White Balance ATW(O) Exposure Exposure manera diferente en modos diferentes. El efecto de reducción de sonido crece...
Descripción funcional Others 2) Sequence Setting • Menú Sequence Setting Camera Setting Ohter Sepuence Setting Preset Focus Sync INTERNAL Preset Setting White Balance ATW(O) Image Adj Exposure Swing SEQ Edit Freeze Back Light Group SEQ Execute MIDDLE Tour SEQ Clear SSNR MIDDLE PTZ Trace...
Page 56
Descripción funcional Nota Preset Edit [001] 5. Si quieres editar los puntos establecidos de función 267/051/1X • Después de configurar los valores de sensibilidad, deberá llevar a cabo una prueba de largo plazo de cámara, vete a cada punto y selecciónalo. Si Focus Mode Manual para asegurarse de que la cámara funciona con normalidad.
Page 57
Descripción funcional Pan Swing : Se ejecuta y establece Vigilancia de movimiento en dirección Tour SEQ : panorámica. Los datos son borrados. Se puede ejecutar y establecer la vigilancia de grupo y los datos se pueden borrar. Tilt Swing : Se ejecuta y establece Vigilancia de movimiento en dirección inclinada. Sepuence Setting Tour SEQ Los datos son borrados.
Descripción funcional Memorize : Operaciones manuales para un mínimo de120 segundos tras la 3) P/T Setting ejecución de esta función son memorizadas en la memoria interna. Sin Pan Limit : embargo, el tiempo de memorización es diferente dependiendo de la La variedad de movimiento en dirección panorámica puede limitarse.
Page 59
Descripción funcional On/Off (encendido/ Apagado) : La aplicación de limitación debe determinarse. Area Masking : El ajuste por defecto es Off (apagado). Si quieres excluir algunas áreas de la vigilancia, se pueden cambiar a negro. Puedes ocultar 8 partes de una pantalla (máximo 32 partes). Area Setting : Las áreas pueden ser indicadas.
Descripción funcional Digital Flip : Main Menu OSD Setting Cuando se maneja la Inclinación hasta un máximo de 90˚ usando el joystick y Camera Setting Camera ID manteniéndolo por un cierto tiempo, la imagen se invierte automáticamente y se ve Camera Name Sequence Setting el área de inclinación opuesta.
Page 61
Descripción funcional Preset Number (El Ajuste por defecto es ON) : On/Off (Encendido/ Apagado) : La operación de esta función está predeterminada. La numeración de programación es establecida. El ajuste por defecto es On (Encendido). Sequence Status (El Ajuste por defecto es ON) : Main Menu OSD Setting La visualización del Grupo de Secuencia está...
Descripción funcional Language : La representación en pantalla podrá visualizarse en inglés NC/NO/OFF : NC/NO/OFF puede ser seleccionado dependiendo del sensor de la alarma. (configuración por defecto) o en, Chino. 1 - 4 (Priority) : Se establece prioridad para la alarma 4. La alarma de prioridad más alta será...
Panel de Control Versión S/W Esta función es utilizada para reiniciar todos los ajustes. Con Protocolo= SAMSUNG TW Estado de Ajustes de Protocolo Camera Default Set. : Si solo se reemplaza el módulo cámara debido a un fallo del módulo ID Domo = 001 ID Cámara Domo...
Estructura del producto e instalación Estructura del Producto Instalación Montaje para el techo tipo (STB-330PC) Fuente Voltaje de electricidad: 24V Cubierta Proceso para el techo tipo (STB-330PC) Voltaje de electricidad: 24V Cubierta *Otras instalaciones: La instalación de accesorios exteriores, los cuales se venden por separado, puede ser llevada a a cabo de varias formas.
Page 65
Estructura del producto e instalación Instalación 1 Instalación 2 CÁMARA SPEED DOME Manual de Uso CÁMARA SPEED DOME Manual de Uso...
Manual: 0.5˚ ~ 120˚/s(64 levels) Preset: 0.5˚ ~ 240˚/s(64 levels) • Este manual no puede ser reproducido o transmitido parcial o globalmente por ningún mecanismo eléctrico, mecánico o de audio sin la aprobación autorizada por escrito de Samsung Techwin. Ángulo mínimo de movimiento 0.05˚...