C500 Ethernet Operation - Lenovo C500 User Manual

C500 Ethernet operation

Ensure that the projector is connected to the network, that the Control option in the On-screen Display
menu is set to RJ45, and that the Network Settings in the On-screen Display are correct. Please see the
Setup Menu section in Chapter 5, "On-screen Display menu controls," on page 5-1 for more information.
Open a browser application and type the IP address of the projector into the URL address bar. The
browser accesses the projector and displays the following window:
Thie Projector Status and Control window shows the current status of the projector. If the projector is off,
other values may be blank. If any values are missing, click the Refresh All button.
To change a setting, click the appropriate radio button, or enter a value into the appropriate field and
click the corresponding SET button. The projector changes to the new setting and the following window
opens in the browser:
Click the Back Remote1 button to return to the Projector Status and Control window.
6-2
Lenovo C500 Projector User's Guide