Table of Contents
Advertisement
Item
Description
User Color
This feature adjusts the color balance in each color of RGB (red, green,
blue) and their neutral colors (cyan, magenta, yellow, white) by using color
correction adjustment. Increasing a color's setting heightens the intensity of
that color on the screen, while a lower setting makes a color less intense.
Press the up or down cursor button to select a color. Press the left or right
cursor button to adjust the selected color. Range: 0 - 100
White Peaking
White Peaking increases the output in the brightest whites without
changing blacks and grays. It does not seriously obscure white detail. For a
stronger image, adjust toward a stronger setting. Press the left or right
cursor button to adjust the white peaking value. Range: 0 - 10
Logo Display
Press the right or left cursor button to enable or disable if the logo displays
when the projector starts, and when no source is detected. range: On - Off
Auto Keystone
When enabled, the projector automatically corrects any keystone distortion
in the image when you press the Auto button (from the remote control or
the keypad). Press the left or right cursor button to enable or disable Auto
Keystone.
Auto Keystone
Press Enter to re-calibrate keystone correction function.
Calibrate
Cancel
Cancels changes made in the On-screen Display screen and returns all
parameters to their previous settings.
User color
To access the User color menu,
1. Press the Menu button to open the On-screen Display.
2. Press the left or right cursor button to move to the Properties menu.
3. Press the up or down cursor button to move to the Advance Feature menu and then press Enter
button.
4. Press the up or down cursor button to move to the User Color menu and then press the Enter button.
5-6
Lenovo C500 Projector User's Guide
Default
n/a
Data source: 10;
Video source 2
On
Off
n/a
n/a
Advertisement
Table of Contents
