XG Series User's Guide
5.2
LACP Information Settings
This section explains about LACP information settings.
5.2.1
LACP Information
This section explains about the commands related to LACP information.
5.2.1.1
lacp system-priority
Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Set the LACP system priority.
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
lacp system-priority <priority>
<priority>
• Priority of LACP system
Set the device priority with a decimal value from 1 to 65535.
A smaller value has a higher priority.
Configuration mode (admin class)
Set the priority of LACP system. The LACP system priority is used to determine which
has a higher priority for the information exchange between a link aggregation group and
another remote link aggregation group. If the priority is same, the system ID (the
designated MAC address +1) with a smaller number has the higher priority.
However, this definition is meaningless if the active or passive is not set for the
linkaggregation operation mode of the "linkaggregation mode".
It is assumed that 32768 has been specified as the LACP system priority.
lacp system-priority 32768
154
Chapter 5 Command Reference
LACP Information Settings