Restoring The Factory Defaults - Huawei D100 User Manual

Accessing the Internet
1
Click Connection.
• If you are required to enter the PIN code,
Note
enter the correct one. If you fail to enter the
correct PIN or PUK code, the network-related
functions are unavailable.
• The SIM card is supplied by the service
provider. For details, contact your service
provider.
• When the Save PIN Code check box is
selected, the Auto validation is enabled.
• If Auto validation is enabled, the PIN code is
recorded and automatically validated after
each restart.
2
If PPP Connection is Manual, click Connect/
Disconnect to connect to or disconnect from the
network.
If PPP Connection is Auto or On
Note
Demand, refresh the page to view the
current network connection status.
4
3
Wait for several minutes. If you are notified that
the connection is successful, you can start the
browser and enter the website address to
access the Internet.

Restoring the Factory Defaults

If you need to reconstruct the network or you forget
the changes of some parameters, you can choose to
restore factory defaults and reconfigure the device.
Reset
Reset: Press and hold it to restore the factory
defaults.
After this operation, all configurations are
Note
restored to the defaults.