Quick Start; Appearance; Pc Configuration Requirements - Huawei D100 User Manual

1

Quick Start

The supported functions and actual
Note
appearance are subject to your product
purchased. The following pictures are displayed
for illustration purpose only. For details of your
product selection, consult your service provider.

Appearance

USB Interface
Power On/Off
Ethernet Interface
Power Interface
Indicator Status
Power Steady on and in yellow green: The
device is switched on successfully.
Indicator Status
WLAN
Mode
Signal
Data Card

PC Configuration Requirements

The recommended PC configurations for using the
Signal Strength
device are as follows:
Mode Indicator
WLAN Indicator
• CPU: Pentium 500 MHz or above
Power Indicator
• Memory: 128 MB RAM or above
• Hard disk: 100 MB or above available space
• Operating System: Windows 2000, Windows XP, or
Windows Vista
• LCD resolution: 800*600 pixel or above, recommended
1024*768 pixel
• Steady on and in yellow green: The
WLAN is enabled;
• Blinking in yellow green: Data is being
transmitted.
Steady on and in yellow green:The data
card is connected successfully.
• Steady on and in yellow green: Signal
strength is strong;
• Blinking in yellow green: Signal strength
is weak;
• Off: The card does not exist or the PIN
code is not verified or the signal is
inexistent.
1