Toshiba e-STUDIO167 Service Manual page 230

Note:
When installing the guide, secure the spring
to the hook of the fuser unit and the other
end of the spring to the guide.
[E] Separation finger
(1) Take off the fuser roller unit.
P.13-12 "[B] Pressure roller unit / Fuser
roller unit"
(2) Remove 3 screws and take off the sub guide.
(3) Remove 5 springs from the hooks.
e-STUDIO167/207/237
FUSER / EXIT UNIT
Hook
Sub guide
Fuser roller unit
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
13 - 16
Spring Guide
Fig. 13-18
Fig. 13-19
Spring
Fig. 13-20