Replacing Consumable Products/Maintenance; Parts; Precautions During Replacement; Cleaning The Printer - Epson AL-C300 Series User Manual

AL-C300 Series User's Guide
Replacing Consumable
Products/Maintenance

Parts

Precautions during replacement

Always observe the following handling precautions
when replacing consumable products or maintenance
parts.
For details about the replacements, see the instructions
that come with the consumable products.
!
Caution:
❏ Be careful not to touch the fuser, which is marked
with a caution label, or the surrounding areas. If
the printer has been in use, the fuser and
surrounding areas may be very hot.
❏ Do not dispose of used consumable products or
maintenance parts in fire, as they may explode
and cause injury. Dispose of them according to
local regulations.
❏ Provide enough space for the replacement
procedure. You will have to open some parts (such
as the printer cover) of the printer when you are
replacing consumables or maintenance parts.
❏ Do not install used consumable products or
maintenance parts that reach end of service life into
the printer.
For details about the handling precautions, see
"Handling the consumable products and maintenance
parts" on page 8.
If a consumable product or maintenance part reaches
the end of its service life, the printer displays the
following message on the LCD panel or the window of
EPSON Status Monitor.
LCD Panel Message
*
Replace Toner uuuu
*
Replace Photocon uuuu
Replace Waste Toner Box
Replace Fuser
* The letters C, M, Y, or K appear in place of uuuu and indicate
the colors Cyan, Magenta, Yellow, and Black respectively.
Troubleshooting
Note:
Messages appear for one consumable product or
maintenance part at a time. After replacing a consumable
product or maintenance part, check the LCD panel for
replacement messages for other consumable products or
maintenance parts.

Cleaning the Printer

The printer needs only minimal cleaning to keep it in
good condition.
If the printer's outer case is dirty or dusty, turn off the
printer and clean it with a soft, clean cloth moistened
with a mild detergent.
c
Important:
Never use alcohol or paint thinner to clean the printer
cover. These chemicals can damage the components
and the case. Be careful not to get water onto the printer
mechanism or any electrical components.

Cleaning the roller

Pickup roller on the MP tray
A
Open the MP tray.
B
Press down on the center of the paper lifting plate
until the left and right locking tabs (white) lock
into place.
80