Quick Print Jobmenu; Confidentialjobmenu; Common Settings; Setup Menu - Epson AL-C300 Series User Manual

AL-C300 Series User's Guide
Item
Paper Size
Duplex (AL-C300DN only)

Quick Print JobMenu

This menu allows you to print or delete print jobs that were stored in the printer's memory using the Quick Print Job
feature (Re-Print Job, Verify Job , Stored Job) of the printer driver's Reserve Job function. For instructions on using
this menu, see"Using the Reserve Job function" on page

ConfidentialJobMenu

This menu allows you to print or delete print jobs stored in the printer's memory using the Confidential Job feature of
the printer driver's Reserve Job function. You need to enter the correct password to access this data. For instructions
on using this menu, see "Using the Reserve Job function" on page

Common Settings

Setup Menu

Item
I/F Time Out
MP Tray Priority
Manual Feed
Getting to Know Your Printer
Explanation
Specifies the paper size for the document printing.
If Auto is selected, the paper size is determined based on the size of the first page that is
printed.
Settings (default in bold):
Auto, A4, A5, A6, B5, LT, HLT, LGL, GLT, GLG, EXE, F4, MON, C10, DL, C6, IB5
Specifies the duplex setting for the document printing. When Duplex Long is selected,
duplex printing is done with long edge binding. When Duplex Short is selected, duplex
printing is done with short edge binding.
Settings (default in bold):
Off (Simplex), Duplex Long, Duplex Short
50.
Explanation
Specifies the length of the time, in seconds, before a time out when interfaces are being
switched automatically. The time before a time out occurs is the length of time from the
point when no data is being received from an interface until the point of switching the
interface. If the printer has a print job when switching the interface, the printer prints the
print job.
Settings (default in bold):
0, 5 ... 60 ... 300 in increments of 1
This setting determines whether the MP tray has the highest or lowest priority when Auto
is selected as the Paper Source setting in the printer driver. When Normal is selected as the
MP Tray Priority, the MP tray has the highest priority as the paper source. If you select
Last, the MP tray has the lowest priority.
Allows you to select the manual feed mode for the MP tray.
Settings (default in bold):
Off, 1st Page, EachPage
19
50.