Wired Ethernet Control Setup; Wireless Control Setup - PRESONUS StudioLive RM32AI Owner's Manual

3.0 Installing the UC Surface Touch-Control Software
3.3

Wired Ethernet Control Setup

3.3 Wired Ethernet Control Setup
100-230V , 50-60 Hz. 120W
WER
3.4

Wireless Control Setup

POWER
Your StudioLive RM32AI and RM16AI can be set up for control with a
wired Ethernet connection in seconds. Simply connect the included
Ethernet cable to the Ethernet control port on the back of the mixer and
to a network router that is also connected to your computer or iPad.
Power User Tip: When you launch UC Surface with the computer and StudioLive RM32AI
or RM16AI connected to the same network, the software will automatically see the mixer.
StudioLive AI mixers do not support hot-swapping the Wi-Fi LAN adapter so you
must have the adapter plugged into the front-panel USB port before turning on your
mixer.
By default, StudioLive mixers are configured to automatically connect to
a wireless network using the following username and password:
• Wireless network name: StudioLive
• Wireless network password: StudioLive
To connect to a custom wireless network, you first need to connect to the mixer
with a wired connection and configure the wireless network preferences.
IN OUT
100-230V , 50-60 Hz. 120W
WARNING:
Power down unit before removing option card
S800 S800 S800 S800 S800 S800 S800 S800 S800 S800 S800 S800
Ethernet cable
StudioLive™ RM-Series Mixers
Owner's Manual
following two conditions: (1) this device may not cause harmful interference, a
accept any interference received, including interference that may cause
:
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE. DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
R :
AVIS
RISQUE DE CHOC ELECTRIQUE — NE PAS OUVRIR
DESIGNED AND ENGINEERED BY PRESONUS • MANUFACTURED IN CHINA • PATENTS PENDING
"PreSonus","STUDIOLIVE" AND "ACTIVE INTEGRATION" ARE REGISTERED TRADEMARKS OF PRESONUS AUDIO ELECTRONICS
SERIAL NUMBER MANUFACTURING DATE
STUDIOLIVE RM32
32 channel x 25 bus digital mix core
with 32 remote XMAX preamps
This device complies with Part 15 of the FCC Rules and ICES-003 for Canada. Operation is subjected to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
IN OUT
WARNING:
Power down unit before removing option card
S800 S800 S800 S800 S800 S800 S800 S800 S800 S800 S800 S800 S/PDIF
Control Output
S/PDIF
Output
15