Access Points - Nokia E5-00 User Manual

72 Connectivity

Access points

Create a new access point
Select Menu Ctrl. panel
>
and Connection
You may receive access point settings in
a message from a service provider.
Some or all access points may be preset
for your device by your service provider,
and you may not be able to change,
create, edit, or remove them.
When you select one of the access point
groups ( , ,
the access point types:
indicates a protected access
point
indicates a packet data access
point
indicates a wireless LAN (WLAN)
access point
Tip: You can create internet access
points in a WLAN with the WLAN wizard.
To create a new access point, select
Access point.
The device asks to check for available
connections. After the search,
connections that are already available
Settings
>
> Destinations.
, , ), you can see
are displayed and can be shared by a
new access point.
If you skip this step, you are asked to
select a connection method and to
define the settings needed.
To edit the settings of an access point,
select one of the access point groups,
scroll to an access point, and select
Options > Edit. Use the instructions
provided by your service provider to edit
the following:
Connection name — Enter a name for
the connection.
Data bearer — Select the data
connection type.
Depending on the data connection you
select, only certain setting fields are
available. Fill in all fields marked with
Must be defined
fields can be left empty, unless your
service provider has instructed
otherwise.
To use a data connection, your service
provider must support this feature, and
if necessary, activate it for your SIM card.
© 2010 Nokia. All rights reserved.
or with a red *. Other