Panasonic AG-VP320 Operating Instructions Manual page 10

Dvd/vcr deck
Hide thumbs Also See for AG-VP320:
Table of Contents

Advertisement

Location of Controls (continued)
Rear View of DECK
AC Power Plug
• While plugged into an AC outlet,
this DECK consumes 0.9 W of
electrical power in off mode.
Component Video Output
Connector (Y, P
(DVD Only)
p. 13
Optical Digital Audio
Output Connector
(DVD Only)
p. 15
S-Video Out Connector
(DVD Only)
pp. 10, 13
The following table shows the status of the output jacks when in VCR or DVD mode.
Video Output
Audio Out 1
Audio Out 2
VCR
DVD
Note
• PROG functions on the remote are not available when using Component Video Output and
S-VIDEO OUT. Please set TV to either RF INPUT or VIDEO INPUT, and then press PROG.
To enjoy PROGRESSIVE SCAN video
(1). Connect Component Video Output to the component video input terminals of a television.
(See p. 13.)
(2). When PROGRESSIVE OUT is set to "ON" in the DVD Main Menu (p. 55), a Progressive
Scan signal is output from the Component Video Output Connector .
Notes
• The screen may shift off-center when using progressive output. Please adjust the screen position if
this occurs. (Refer to your TV manual.)
• If the television is not progressive compatible, a progressive scan picture is not available.
Connect the Video Output or S-Video Output connector (see p. 12, 13) and set PROGRESSIVE
OUT to "OFF" in the DVD Main Menu. (See p. 55.)
10
AG-VP320-1(Initial)_1-17.p65
Bold:
VCR Function
Bold Italic : VCR and DVD Functions
VHF/UHF Antenna Input Terminal
p. 12
, P
)
B
R
Audio Output 2
Connector (L/R)
p. 13
Component
Video Output
YES
N/A
YES
YES
10
Italic : DVD Function
VHF/UHF Antenna Output Terminal
p.12
Video Output
Video Input
Connector
Connector
p. 12
p. 35
Audio Input
Connector (L/R)
p. 35
Audio Output 1
Connector (L/R)
p. 12
VHF/UHF
S-VIDEO OUT
Antenna Out
N/A
YES
YES
2005/05/18, 16:11

Advertisement

Table of Contents
loading

Table of Contents