Set Host Response - Fujitsu ETERNUS DX100 S3 Setup Manual

Chapter 5 Host Interface Management

5.4 Set Host Response

5.4 Set Host Response
The host response configures the appropriate operation mode on which the host makes connection. In normal
host connection, the recommended patterns prepared for each OS type in advance or the default settings are
used.
Recommended Patterns of Host Responses
Host response name
Solaris MPxIO
HP-UX
AIX
AIX VxVM
VS850/SVC
BS2000
Default
For details about the recommended patterns of host responses, refer to "Add Host Response" in "ETERNUS Web
GUI User's Guide (Settings)".
For details on assigning an appropriate host response, refer to "FUJITSU Storage ETERNUS DX Configuration
Guide -Server Connection-". For details on modifying the host response settings, refer to "Add Host Response"
in "ETERNUS Web GUI User's Guide (Settings)".
Set this parameter to connect to an Oracle Solaris host and to use the OS standard Multipath
Driver (MPxIO).
Set this parameter to connect to an HP-UX host.
Set this parameter to connect to an AIX host.
Set this parameter to connect to an AIX host and to use VERITAS Volume Manager (VxVM).
Set this parameter to connect to an ETERNUS VS850 Virtualization Storage or an IBM SAN
Volume Controller (SVC).
Set this parameter to connect to a BS2000 host and to enable the LUN expand mode.
Set this parameter for any host connection environments that are not listed above.
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
Connection environment
89
P2X0-1250-06ENZ0