Safety Precautions - Wyrestorm EXP-EX-COAX-50 Instruction Manual

Contents
Introduction
Features

Safety Precautions

Specification
Panel Description
i. Transmitter
ii. Receiver
Typical Application
Connection & Operation
EDID & Distance Setting
2. Features
Troubleshooting
FAQ's
MX0404-QI
Maintenance
• Quick and easy installation – set up in seconds straight out of
Product Service
the box.
• Simplified ports - Input: HDMI – Output: integrated RJ45
Mail In Service
connectors for a single Cat5e/6/7 UTP cable to each display
Warranty
point for ease of installation.
Warranty Limits and Exclusions
• Conforms to IEEE-568B standards
• Each HDMI port also supports DVI signals.
Installation Notes
• Each Output port can be fed to multiple displays (cascaded).
Introduction
• Enables up to 4 HDMI video/audio devices to be independently
switched through up to 4 HDMI displays or projectors for
uncompressed digital distribution.
The WyreStorm Express™ EXP-EX-COAX-50 is a single
cable point to point HDMI extender set using copper-core
• Each output able to show any connected source simultaneously
75Ohm Coax cable to transmit 1080p HD video @60Hz
regardless of whether the input carries HDCP encryption.
and multi-channel HD audio over distance up to 50m
• Refined for Custom Install and Home Theatre Installations.
(164ft) including wide-band, 2-way IR control from both
source and display location. • Reads and copies EDID from connected devices with additional
EDID configuration through customisable DIP switch settings if
The 'Analog Sun' may have set, but even in these days necessary.
of digital distribution, the use of coax as a cable medium
• 2k resolution supported.
is still a popular requirement to transmit and control HD
• Fully 3D compatible – Frame sequential 3D (Blu-ray) and
signals between sources and display location in legacy or
interlaced stereoscopic 3D (satellite broadcasts etc.)
mixed analog/digital systems such as antenna and cable/
satellite installations, where coax is effective due to the
• Supports all high definition resolutions up to and including
low loss at high frequencies, vital for TV Set-top boxes
1080p and standard video formats.
and cable modem installations.
• RS232 port.
Key to any installation is successful transmission, with
• Choose from 6 switching modes – infrared remote control, front
the EXP-EX-COAX-50 featuring EDID management
panel buttons, local IR, IR call-back, LAN and RS232.
to manually handle device communication and cable
• Simple switching remote control included, which can also be
distance settings to fine tune signal extension based
learned into a universal remote handset to allow the control of
on the length of cable between devices to maximise
multiple devices from one handset.
compatibility and reliable delivery of the signal between
source and display.
• Fully compatible for integration with market leading control systems.
• 4 x IR 3.5mm mini-jack ports for each output to link IR from
control system to control display
2
• Additional infrared extension port for longer IR connections
• HDMI v.1.3
Maintaining the integrity of the distribution within the
installation environment is also paramount and the EXP-
EX-COAX-50 include protection against ESD (electrostatic
discharge) to further stabilise transmission with LED
indication on the unit housing providing clear confirmation
of power and signal link status.
As scalable as they are reliable, the EXP-EX-COAX-50
can be cascaded by connecting additional multiple
extenders to further lengthen transmission and
offer greater flexibility, whatever the application. The
WyreStorm Express™ EXP-EX-COAX-50 is the perfect
solution for retrofit HD distribution projects in which a
Coax cable infrastructure is already present, as well for
installers whose primary experience lies in antenna and
satellite installations.
Features • Protection against ESD (electrostatic discharge) included within
the unit to further stabilise transmission.
• LED indications for clear power and video signal selection.
• Single Coax cable extends 1080p HD video @ 60Hz
• 5v mains supply included but receivers may be powered through the
and multi channel audio transmissions over distances
USB port of the display using Wyrestorm USB to 5v power adaptor)
up to 50m (164ft)
• Automatically adjusts signal feedback, equalization and
amplification
• EDID/Setting DIP switches on transmitter and receiver
USB to 5V Cable
encourages communication between source/display
Part Number CAB-USB-5V
devices to solve compatibility issues
• HDMI 1.3 supported
• Fully cascadable to further lengthen transmission.
• Each port supports HDMI or DVI signals
• HDCP compliant
*NOTE: ideal conditions denote cable run is within
• LED indication of device power and video signal status
specified distance range of product, no electrical
Units contain ESD (electrostatic discharge) protection
interference, the use of straight cable runs with no bends
technology to guard again static build-up that can
or kinks and no patch panels or wall outlets used. Please
damage circuitry
be advised that the presence of any of these factors in
• Wide band, 2-way IR control of source from display
your installation may compromise bandwidth and signal
locations and display from source locations
strength. For longer transmission distances, RS232 control
• 24bit color depth (True color)
and Ethernet pass-through, please see our full HDBaseT
• Mounting brackets supplied
or HDBT Lite range of matrices, transmitters, receivers and
• Lockable BNC connectors
extender sets.
• IR receiver, emitter and 5v mains power supply included
• Units can be cascaded by connecting additional
transmitters and receivers to further expand distribution
Safety Precautions
3. Safety Precautions
WARNING
WARNING
To reduce the risk of fire, electric shock
To reduce the risk of fire, electric shock
or product damage:
or product damage:
1. Do not expose this apparatus to rain, moisture, sprays,
1. Do not expose this apparatus to rain, moisture,
drips or splashes and ensure that no objects containing
sprays, drips or splashes and ensure that no objects
liquids are placed on the apparatus, including cups,
containing liquids are placed on the apparatus,
glasses and vases.
including cups, glasses and vases.
2. Do not place this unit in a confined space such as
enclosed shelving, cabinets or bookshelves. Ensure the
unit is adequately ventilated.
3. To prevent the risk of electric shock or fire hazard due to
overheating, do not cover the unit or obstruct ventilation
openings with material, newspaper, cardboard or