3:1 hdmi/vga/dp switching extender with scaling receiver, relay triggering and hdcp 2.2 (13 pages)
Summary of Contents for Wyrestorm EX-1UTP-IR-50-POH
Page 1
Single Cable Cat5e/6/7 HD Extenders with IR and PoH Instruction Manual Thank you for choosing this WyreStorm product. Please read these instructions carefully before installing to avoid complications later. Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
Transmitter location. Earth Ground HDMI INPUT EDID DIP Switch settings – printed on base of Transmitter (see Transmitter EDID Settings for details). Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
Page 5
5v Power Input – optional: for use if power supply issues are experienced at Transmitter location. Earth Ground HDMI OUTPUT DIP SWITCH SETTINGS – printed on base of Receiver (see Receiver DIP Settings for details) Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
Infrared windows can be seen by shining a to RECEIVER. Poor cable and terminations lead to flashlight onto the front of the device – the IR sensor intermittent performance and longer install times. Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
Default: Long cable setting OFF NOTE For ease of installation and convenience on site, we have printed the SETTINGS for both Transmitter and Receiver on the base of the units. Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
Swap your HDMI or VGA leads and check Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
Page 9
You should see the remote transmitter flashing to indicate Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
USB socket on the TV to power the receiver, this also means that the receiver is only powered when the TV is on making the system more environmentally friendly. Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
DIP switches. This useful feature uses an alternative Equalisation method to re-sync the signal over longer distances. (feature available on selected models) Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
Installation Notes If your product does not work properly because of a defect in materials or workmanship, Wyrestorm (referred to as “the warrantor”) will, for the length of the period indicated as below, (Parts (3) Year, Labor(90) Days) which starts with the date of original purchase (“Limited...
Need help?
Do you have a question about the EX-1UTP-IR-50-POH and is the answer not in the manual?
Questions and answers