Table of Contents
Advertisement
Replacement Parts
These items are available for your BISSELL ProHeat 2X deep cleaner.
Call 1-800-237-7691 or visit www.BISSELL.com
PART #
PART NAME
203-7017
Tank Assembly (complete)
(Black)
203-6618
Tank Bottom (Black)
203-7649
Floor Nozzle with End Cap
Assembly
203-6845
Float Door
203-6682
Cord Wrap (Blue Illusion)
203-6686
Brush Roll – 6 row (includes
1 brush, axle, 2 swivel arms)
203-6804
Large Brush Belt (cord side)
203-6690
Hose Rack Assembly
(Top/Bottom Hose Rack, Screws)
*Not all parts are included with every model.
PART #
PART NAME
203-6660
Tank Lid (Black)
203-6675
Cap and Insert for Tank
203-6679
Autoload Gasket (fits tank)
203-6680
Tank Filter (Lint Screen)
203-6685
Clear End Cap w/Edge Brushes
(2 pack, includes screws)
203-6688
Small Brush Belt
(non-cord side)
203-6689
Hose Secure Latch
www.BISSELL.com
800.237.7691
17
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PROHEAT 2X and is the answer not in the manual?
Questions and answers
I WANT TO DISASSEMBLE THE MACHINE TO REMOVE CALCIUM FROM THE HEATER AN INSPECT THE "SPRAY" SWITCH
@William Greer
To disassemble the Bissell ProHeat 2X for maintenance, including removing calcium from the heater and inspecting the spray switch, follow these steps:
1. Turn off and unplug the machine to ensure safety.
2. Remove the clean water tank from the unit.
3. Use a Phillips head screwdriver to remove the screw at the back of the handle by twisting counterclockwise. Keep the screw safe for reassembly.
4. Remove the carry handle by pulling outward at both sides using your thumb as leverage.
5. Use a flathead screwdriver to pry off both sides of the plastic collar at the base of the handle.
6. Pull up on the upper handle until it releases from the machine.
Once disassembled, you can access the internal components, including the heater and spray system, for cleaning and inspection.
This answer is automatically generated
how do you remove the wheels from my pro heat2x