Configuring The Settings Of Audio Output Signals (Sound) - Yamaha RX-V571 Owner's Manual

Configuring the settings of audio output signals
(Sound)
Configuring the settings of audio output signals.
■
Lipsync
Adjusts the delay between audio and video output (Lipsync function).
❏ Auto
When connected to a TV via HDMI, automatically adjusts audio output timing if the TV
supports an automatic lipsync function. If necessary, fine adjustment of the audio output
timing is possible. The difference between the result of auto delay and the fine
adjustments is displayed to the right of "Offset."
Setting range
0 ms to 250 ms (1 ms increments)
Default setting
0 ms
❏ Manual
Manually adjusts the correction time.
Setting range
0 ms to 250 ms (1 ms increments)
Default setting
0 ms
■
Dynamic Range
Selects the dynamic range adjustment method for audio bit stream (Dolby Digital and
DTS) signal playback.
Settings
Maximum (Default) Produces audio without adjusting the dynamic range.
Standard Adjusts the dynamic range for optimum volume for regular home use.
(Minimum) Sets the dynamic range suitable for low volume or a quiet
environment, such as at night, for bit stream signals except for Dolby
TrueHD signals.
Minimum/Auto
(Auto) Adjusts the dynamic range for Dolby TrueHD signals based on
input signal information.
■
Max Volume
Specifies the maximum volume level that is adjustable with VOLUME on the remote
control or VOLUME on the front panel.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
Default setting
+16.5 dB
■
Initial Volume
Sets the initial volume for when the receiver is turned on.
Settings
The volume is set at the level when the receiver last entered standby
Off (Default)
mode.
Makes the initial volume Mute or -80 dB to +16.5 dB (0.5 dB
On increments). (This setting is only available when setting a volume lower
than Max Volume.)
68
En