Yamaha RX-V571 Owner's Manual page 61

■
Extended Surround (EXTD Surround)
Selects the 5.1 to 7.1-channel signal playback method when surround back speakers
are used.
Input sources
HDMI1-5, AV1-4, V-AUX and the input source set as a TV audio input when ARC is used
Settings
Automatically selects the most suitable decoder and reproduces the
signal in 6.1 or 7.1-channel when audio including a flag for surround
Auto (Default) back channel is output. However, when the DTS or DTS-HD signal in 5.1
or 6.1-channel is input, the unit reproduces the signal in 7.1-channel
despite a flag for surround back channel.
Always reproduces signals in 7.1-channel using the Dolby Pro Logic
II
PL x Movie
Movie decoder. (It is available only when two surround back speakers
II
( PL xMo)
are connected.)
Always reproduces signals in 6.1- or 7.1-channel using the Dolby Pro
II
PL x Music
II
Logic x Music decoder. (It is available when the number of connected
II
( PL xMu)
surround back speakers is one or more.)
Automatically selects the most suitable decoder and always reproduces
EX/ES
the signal in 6.1 or 7.1-channel.
Off Always reproduces original channels.
■
Signal Info
Displays information on the current video and audio signals.
Input sources
HDMI1-5, AV1-4, V-AUX and the input source set as a TV audio input when ARC is used
Items
Audio signal format.
Format
When this unit is unable to detect a digital signal, it automatically
(FORMAT)
switches to an analog input.
The number of source channels in the input signal (front/ surround/
LFE).
Channel For example, "3/2/0.1" means 3 front channels, 2 surround channels
II
(CHAN) and LFE.
x
If a channel that cannot be expressed as the above, a total number of
channels such as "5.1ch" may be displayed.
Sampling The number of samples taken per second when converting an analog
(SAMPL) signal into a digital signal.
Bitrate
The number of bits passing a given point per second.
(B RATE)
Input
Video input signal format
(V IN)
Output
Video output signal format.
(V OUT)
Error messages about HDMI. This item appears only when error
concerning HDMI occurs.
HDCP Error (HDCP Error):
The connected TV is not compliant to the High-bandwidth Digital
Message
Content Protection (HDCP). Make sure that the HDCP compliant TV is
(V MSG)
connected.
Device Over (Device Over):
The number of devices connected to HDMI OUT jack exceeded the
limitation. Reduce the number of the connected devices.
■
Procedure to switch the items on the front display.
1
Press the cursor keys (
Selected item
FORMAT
Dolby D
Front display
• The list of all signal information is displayed on a TV monitor.
/ ) to switch the display of information on the front display.
Signal information
VOL.
SW
C
L R
SL SR
61
En