Deluxe high-efficiency magnetic loop tuner (18 pages)
Summary of Contents for MFJ MFJ-926
Page 1
Automatic Antenna Tunner Model MFJ-926 INSTRUCTION MANUAL CAUTION: Read All Instructions Before Operating Equipment MFJ ENTERPRISES, INC. 300 Industrial Park Road Starkville, MS 39759 USA Tel: 662-323-5869 Fax: 662-323-6551 COPYRIGHT 2006 MFJ ENTERPRISES, INC. VERSION 1A...
Page 3
MFJ-926 Remote Automatic Antenna Tuner Introduction The MFJ-926 Remote Automatic Antenna Tuner is designed to cover all frequencies ranging from 1.8-30 MHz. The multi-signal processing circuit switches inductance and capacitance as needed to match the impedance of the antenna system with your radio. Fast tuning, less than 2 seconds after initial tuning.
Page 4
Installations The MFJ-926 can be installed for mobile or base station operation. For mobile operation the antenna terminal should be connected to a suitable antenna. The ground should be connected to the body/frame of the vehicle with a short heavy gauge wire or strap. Keep this connection to a minimum. Base station installations may vary but all installations must have a suitable ground and a wire/antenna of suitable length depending on the operating frequency.
After verifying each of the connections to the tuner, choose your desired frequency and switch the transmit mode as desired. Press the PTT key, the MFJ-926 will automatically tune. You will hear some “click click” noisy, it means the auto tuner is tuning.
MFJ Enterprises, Inc. warrants to the original owner of this product, if manufactured by MFJ Enterprises, Inc. and purchased from an authorized dealer or directly from MFJ Enterprises, Inc. to be free from defects in material and workmanship for a period of 12 months from date of purchase provided the following terms of this warranty are satisfied.
Page 8
MFJ ENTERPRISES, INC. MFJ-926 Manual 300 Industrial Park Road Version 1A Starkville, MS 39759 Printed In U.S.A.
Need help?
Do you have a question about the MFJ-926 and is the answer not in the manual?
Questions and answers