Installing The Heat Sink; Mainboard Expansions; Upgrading Main Memory; Replacing The Processor - Fujitsu CELSIUS W410 Operating Manual

Installing the heat sink

► Open the casing (see
Install the heat sink again in the same way as it was fitted in the
device at the time of removal.
► Insert the heat sink into the casing. To do this, correctly align the screw holes on
the heat sink with the screw holes on the mainboard.
► Tighten the screws.
► Connect the fan cables to the mainboard.

Mainboard expansions

Details on how to upgrade the main memory or the processor of your device
can be found in the manual for the mainboard.
Mainboard Mainmemory Processor Lithium battery Upgrades

Upgrading main memory

► Open the casing (see
Mainmemory
► Upgrade the main memory according to the description in the manual for the mainboard.
► Close the casing (see

Replacing the processor

► Open the casing (see
► Remove the heat sink (see
► Replace the processor as described in the manual for the mainboard.
► Install the heat sink again (see
► Close the casing (see
Fujitsu Technology Solutions
"Opening the casing", Page
"Opening the casing", Page
"Closing the casing", Page
"Opening the casing", Page
"Removing the heat sink", Page
"Installing the heat sink", Page
"Closing the casing", Page
35).
35).
36).
35).
52).
53).
36).
System expansions
53