Removing The Hard Disk Drive - Fujitsu CELSIUS W410 Operating Manual

System expansions

Removing the hard disk drive

► Open the casing (see
► Slightly press together the EasyChange rails mounted on the hard disk drive (1) and pull
the hard disk drive slightly out of the drive cage in the direction of the arrow (2).
► Disconnect the cables connected to the hard disk drive.
► Slightly press together the EasyChange rails mounted on the hard disk drive (1) and pull the
hard disk drive completely out of the drive cage in the direction of the arrow (2).
► Pull the EasyChange rails off the hard disk drive.
► If you no longer need the EasyChange rails, secure them again at their location in the drive cage.
It may be necessary to modify the entry for the drive in the BIOS Setup.
48
"Opening the casing", Page
1
2
1
35).
Fujitsu Technology Solutions