Resetting The Picture Settings To The Factory Defaults - Samsung 450 User Manual

I
4 Press the .. or T button to select Picture, Option then press the ENTER
button.
Press the .. or T button to select 3D Effect then press the ENTER button.
5 Press the .. or T button to select Mode, then press the ENTER button.
Press the .. or
T
button to select Off, Mode1 or Mode2 then press the
ENTER button.
• Off : Turns the 3D Effect function off.
• Mode1 :
Mode 1 operates with right sync first.
• Mode2 :
Mode 2 operates with left sync first.
~
If the 3D effect is not working properly, it means the Mode and 3D
glasses may not be syncing properly. To put them in sync, switch to the
other mode.
Changing the Format
Select the optimal input format to match your graphic cards or 3D Software.
See the descriptions for Steps 1 to 4 above.
6 Press the .. or T button to select Format, then press the ENTER button.
7 Press the .. or T button to select Checker Board, Horizontal or Vertical
then press the ENTER button.
If the output format of your graphic card or 3D
Checker Board
software is Checkerboard, select this input
format
the output format of your graphic card or 3D
Horizontal
software is Horizontal interleaved, select this
input format.
If the output format of your graphic card or 3D
Vertical
software is Vertical interleaved, select this input
format.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the .. or T button to select 3D Effect.
3 Press the ENTER button to start the 3D Effect.
Resetting the Picture Settings to the Factory Defaults
1 To select the desired picture mode, follow the Activating Picture Options
instructions numbers 1 and 2. (see page 26)
2 Press the .. or T button to select Picture Reset, then press the ENTER button.
Press the
~
or
~
button to select OK or Cancel then press the ENTER button.
Press the EXIT button to exit.
~ Each mode can be reset.