Panasonic CF-17 Operating Instructions Manual page 12

First-time Operation
In preparation for trouble
Retail Version of Windows 95
12
When the computer fails to work properly or system files on the hard disk are deleted, the
computer can be returned to factory condition by performing the "Reinstallation" procedure.
Important: To perform the "Reinstallation" procedure (
backup disk prior to any trouble. (
A backup disk cannot be created after reinstallation becomes necessary. Therefore, be sure to
create a backup disk soon after purchasing your computer, and store the disk in a safe location
along with the supplied Windows 95 System Pack.
When using the files in the following folders available on the retail version of the Windows 95
CD-ROM, it is necessary to run a separate file decompression program.
\admin
\datalink
\drivers
\help
\other
To uncompress the file, it is necessary to have about 75 MB of free disk space on the hard disk.
The floppy disk drive (CF-VFDU01)*
FDD, and a CD-ROM drive (purchased separately) are necessary. Create the "FIRSTAID FD"
with the CD-ROM drive in use.
1
* indicates to be purchased separately.
File decompression method:
Turn off the computer.
1
Attach the port replicator*
2
Insert the FIRSTAID FD.
3
Turn on the computer.
4
At the confirmation message, select [No].
5
Insert the Product Recovery CD-ROM.
6
At the prompt, input the following:
L:\en\addfile Enter
Follow the message on the screen.
After this program is executed, the contents of the above folders will be decompressed to
the c:\util\win95add folder.
page21), it is necessary to create a
"Creating BACKUP DISKS")
1 and the port replicator (CF-VEB341)*
( "Creating BACKUP DISKS")
, floppy disk drive, and CD-ROM drive.
2
1 to connect the