Communication; Download Program - Metrologic SP5500 OptimusS Series User Manual

Communication

Communication menu allows the developer to transfer data and programs to and from the
Optimus to a host device.
To access the communication settings highlight the Tools menu (See Figure 27).
Communication option will appear with three options available for setting up communication to
the host device*.

Download Program

The utility used for program downloads is OP_Load.
This executable utility enables either the developer
or the user to configure the program download for
RS232, Cradle-IR, and Modem. It is necessary to
specify the correct communications port (1-255 are
available) for the host device. Baud rate is another
setting which must be set correctly.
If the modem option is selected the Configure
button will become active and must be clicked on in
order to configure the modem and have proper
communication via the modem option.
Note: Communication settings must match between the OP_Load and Optimus or data
cannot be transmitted.
*
Depending on the model of Optimus selected will determine the options available.
Figure 27
34
Figure 28 Program Download