Instructions for Use The ‘ENA 3 Instructions for Use’ has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.
Page 2
ENA 3 IMPORTANT SAFEGUARDS These safeguards apply for machines with UL safety test (see rating plate and chapter 9, ‘Technical data’). Follow the basic safety Follow the basic safety When using electrical appliances, basic safety precautions should precautions precautions always be followed, to reduce the risk of fire, electric shock, and/or injury to persons, including the following: Read all instructions.
ENA 3 Special cord set instructions Special cord set instructions a. A short power supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a long cord. Your ENA has a 3-pin grounded plug. b.
Page 4
ENA 3 NEVER DO NEVER DO Never fill instant coffee, chocolate mix etc. into the grinder or (or you will void your (or you will void your ground coffee funnel (grunder by-pass). It will damage the warranty protection): warranty protection): functioning of the brewing chamber.
Page 7
CAUTION References to the JURA website where The CAUTION symbol is used to draw attention to circumstances which could you can find interesting additional infor- result in damage to the machine.
Only connect the machine to a power supply by JURA or by a JURA approved service centre. in accordance with the information on the Make sure that the ENA and the power cable rating plate.
You can also get to know your ENA in a fun way on the PC. We thank you for the confidence that you have placed in us by purchasing a JURA ENA coffee The Knowledge Builder awaits you at machine. You have chosen www.jura.com.
ENA 3 Remove the water tank and rinse with cold Turn the Rotary Switch until LANGUAGE water. is displayed. ENGLISH Fill the water tank with cold, fresh water and replace the tank. Filling the bean container CAUTION Coffee beans which have been treated with additives (e.g.
ENA 3 Using and activating filter Press the Rotary Switch. Your ENA no longer requires descaling if you use OPEN TAP CLARIS plus filter cartridges. Turn the switch to position , water is FILTER RINSING Perform the ‘Insert filter’ operation without discharged from the nozzle.
ENA 3 Example: Changing the water hardness from If the fineness of grind setting is too fine, the coffee only drips from the coffee spout. 16°dH 25°dH Precondition: appears on the display. READY Open the cover behind the Rotary Switch. Press the P button until MAINTENANCE appears.
In conjunction with Pre-heat your cups. your JURA ENA you too can achieve perfect Use a teaspoon for sugar and do not use results. sugar lumps to ensure that the crema or milk foam are not spoilt.
ENA 3 1 coffee at the touch of a button Example: Preparing a cup of coffee using Precondition: appears on the display. pre-ground coffee. READY Place the cup under the coffee spout. Precondition: is shown on the display. READY Press the Rotary Switch to start coffee Place the cup under the coffee spout.
ENA 3 One-off setting before and during Precondition: is shown on the display. READY preparation Place the cup under the coffee spout. The coffee strength can be changed before Press the Rotary Switch and hold it down. preparation or during the grinding operation. During grinding the strength of the coffee is displayed.
ENA 3 Turn the switch to position Press the Rotary Switch. , the milk foam is being prepared. STEAM HEATING Turn the switch clockwise to position appears as soon as the ENA is READY when there is sufficient milk foam in the sufficiently heated.
ENA 3 If the nozzle does not reach into the cup, lift Set the selector lever of the nozzle to the the cup towards the nozzle. milk position. Turn the Rotary Switch until STEAM displayed. Press the Rotary Switch. HEATING appears as soon as the ENA is READY sufficiently heated.
ENA 3 Precondition: appears on the display. Before coffee or hot water is prepared, the READY Open the cover behind the Rotary Switch. machine heats up. Press the P button until MAINTENANCE appears. Example: Changing the energy-saving mode from Turn the Rotary Switch until PRODUCT ENERGY - ENERGY p...
ENA 3 Press the Rotary Switch to enter the Language programme item. The language is selected when the machine is used for the first time. 5 HRS Turn the Rotary Switch until 2 HRS displayed. The following languages can be selected: Press the Rotary Switch to confirm the German setting.
ENA 3 4 Maintenance Press the Rotary Switch to start rinsing. , rinsing stops automatically. RINSING The ENA has the following integrated mainte- READY nance programmes: Rinse machine Changing the filter following a prompt Change filter Clean machine Descale machine After 50 litres of water have flowed through the filter, its capacity is reached.
ADD TABLET Open the powder chute for pre-ground INSERT FILTER Continue with the third prompt to take coffee and drop in a JURA cleaning tablet. action (indicated by ), as described in the section ‘Changing the filter following a prompt’.
Risk of damage to the machine and residues in READY Open the cover behind the Rotary Switch. the water if the wrong descaling agent is used. Press the P button until Only use original JURA care products. MAINTENANCE appears. Press the Rotary Switch to enter the CAUTION programme item.
Press the Rotary Switch. could be left in the water. HEATING Only use original JURA care products. appears as soon as the ENA is READY sufficiently heated. The ENA will not prompt you to clean the Turn the switch to position Professional Cappuccino Frother.
Rinsing the Easy Cappuccino Frother Only use original JURA care products. To ensure that the Easy Cappuccino Frother works perfectly, you should rinse it with water whenever The ENA will not prompt you to clean the you have prepared some milk.
ENA 3 Removing foreign objects Fill the bean container with fresh coffee Even the highest-quality coffee beans can contain beans, then close the bean container cover. foreign objects. These can block the grinder. Cleaning the bean container WARNING Coffee beans may be covered with a slight oil film Danger of injury to the fingers when the grinder is which remains on the walls of the bean container.
Designed specially for JURA coffee machines, it has a neutral pH value and is If you do plan to be away for some time (e.g. on placed directly in the water tank.
ENA 3 6 Display messages Message Cause/Result Action FILL WATER TANK The water tank is empty. Fill the water tank (refer to You cannot prepare any coffee Chapter 1 ‘Preparing and using specialities, hot water or steam. for the first time – Filling the water tank’).
Contact Customer Support in your country. Contact information is available on the company website at www.jura.com. If you have not been able to solve the problem, contact Customer Support in your country. Contact information is available on the company website at www.jura.com.
ENA 3 8 Transport and environmentally 9 Technical data neutral disposal The voltage and current vary according to Transport/Emptying the system the safety test. Please consult the rating Keep the packaging of your ENA. It should be plate before connecting the device. used to protect the machine during transpor- tation.
Page 37
ENA 3 Descaling Internet JURA descaling tablets 26 JURA on the Internet 11 Machine 26 Knowledge Builder 11 Water tank 31 Dismantling and rinsing Knowledge Builder 11 2-stage frothing nozzle 30 Easy Cappuccino Frother 30 Professional Cappuccino Frother 29 Machine...
Page 38
Switch-off Automatic 22 Feedback Switch for hot water and steam preparation 8 Your opinion is important to us! Symbol description 7 Use the contact link at www.jura.com. System, emptying 35 Technical data 35 Transport 35 Troubleshooting 34 Use, proper 10...
Need help?
Do you have a question about the ENA3 and is the answer not in the manual?
Questions and answers