Sharp SL-5500 Troubleshooting Manual page 8

• I have set a scheduled alarm but the alarm does not sound.
• You might have set the sound volume to off. Tap the Sound volume icon on the
taskbar. Turn the "Mute" checkbox off, adjust the slider, and turn the "Alarm" checkbox
on. (See the Start-up Guide: "Adjusting the volume".)
• You might have selected "Silent" when you set the schedule alarm. When "Silent"
was selected, a display will appear on the screen but the alarm will not produce a
sound. (See the Operation Manual: "Calendar".)
• The CF or SD/MMC card is not being recognized properly.
• The CF or SD card icon does not appear on the taskbar.
• Turn the power off and on again.
• See the Start-up Guide: "Using expansion memory cards" and be sure to remove
the card and insert it again correctly.
• Use only memory cards that have been approved by SHARP. Other cards may not
work properly with the unit.
• The CF or SD card icon does not disappear from the taskbar by tapping
the icon and then tapping "Eject card" (or "Eject SD-card").
• The operation ("Eject card" or "Eject SD-card") is not valid if any files on a memory
card are opened, if a card is selected as the storage in the EMail application, or if a
modem card is in use. In such cases, please eject the card after closing all applications
and turning off the unit.
• IR communication is not possible.
• Is the mutual distance correct? (See the Operation Manual: "Beam Receive".)
• Are the IR communication ports on both units (transmitting and receiving ports)
aligned straight?
• Is data being sent from the sending unit after the receiving mode has been entered
on the receiving unit?
• Not sure what type of accessories and peripherals can be used with the unit.
• For information regarding accessories, peripherals, etc., visit our Web site. (See the
"Product Support" section of the Start-up Guide.)
7