NEC NEAX 2400 IPX User Manual page 52

• [RECEIVER VOLUME SET] specifies the Receiver Volume.
[RECEIVER VOLUME SET]
∗
1:SYSTEM DEFAULT
2:DEFAULT BY CALL
3:SAME AS PREVIOUS CALL
Press the desired numeric key. An asterisk shows the selected number.
: ⎯ Receiver Volume is set to the default level of the ATI card.
1
: ⎯ Receiver Volume is set to the level in accordance with the system default.
2
: ⎯ Receiver Volume is set to the level adjusted by the UP/DOWN key.
3
: ⎯ Receiver Volume is set to the level (-8dB) lower than System Default.
4
SRC : ⎯ returns to configuration menu.
Note : Default setting is "1:SYSTEM DEFAULT".
Press SRC to return to configuration menu.
Press ANSWER to update configuration data.
Press RELEASE to cancel updating.
SRC:menu
4:QUIET PLACE
– 47 –