10
DISASSEMBLY PROCEDURE
PE-3EAK.TH
PE-4EAK.TH
PE-3EAK.TH-U
PE-4EAK.TH-U
OPERATING PROCEDURE
1. Removing the drain pan
! Unscrew each set screw on the right and left, and remove
the drain pan pushing it toward the back.
2. Removing the electrical parts
! Remove the electrical parts cover.
(set screw
2) and the parts as below
Indoor controller board
Power board
Fan capacitor
Terminal block
3. Removing the indoor coil thermistor
! Remove the drain pan.
@ Remove the electrical parts cover.
# Remove the set wire of the indoor coil thermistor.
PE-5EAK.TH
PE-6EAK.TH
PE-5EAK.TH-U
PE-6EAK.TH-U
Photo 1
(See Photo 1)
Drain pan
Photo 2
(See Photo 2)
(See Photo 3)
Photo 3
Terminal
block
Photo 4
(See Photo 1)
(See Photo 2 )
(See Photo 4)
56
PHOTOS&ILLUSTRATIONS
Room temperature
thermistor
Set screw
(for drain pan)
Indoor
controller board
Fan motor
Electrical
parts cover
Set
screw
Power board
Fan capacitor
Indoor coil
thermistor
Need help?
Do you have a question about the Mr.SLIM PE-3EAK and is the answer not in the manual?
Questions and answers