Hitachi FDV 16VB2 Handling Instructions Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Drill
  5. FDV 16VB2
  6. Handling instructions manual

Hitachi FDV 16VB2 Handling Instructions Manual

Impact drill
Hide thumbs Also See for FDV 16VB2:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual, Handling Instructions Manual
Impact Drill
Model FDV 16VB2

Handling instructions

Note:
Before using this Electric Power Tool, carefully read through these
HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is
recommended that these INSTRUCTIONS be kept readily available
as an important reference when using this power tool.

Advertisement

Table of Contents
loading

Related Manuals for Hitachi FDV 16VB2

Summary of Contents for Hitachi FDV 16VB2

  • Page 1: Handling Instructions

    Impact Drill Model FDV 16VB2 Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that these INSTRUCTIONS be kept readily available as an important reference when using this power tool.

  • Page 2: General Safety Rules

    c) Avoid accidental starting. Ensure the switch is in GENERAL SAFETY RULES the off position before plugging in. Carrying power tools with your finger on the WARNING! switch or plugging in power tools that have the Read all instructions switch on invites accidents. Failure to follow all instructions listed below may result in d) Remove any adjusting key or wrench before electric shock, fire and/or serious injury.

  • Page 3: Impact Drill Safety Warnings

    PRECAUTION IMPACT DRILL SAFETY WARNINGS Keep children and infirm persons away. When not in use, tools should be stored out of reach of 1. Wear ear protectors with impact drills. children and infirm persons. Exposure to noise can cause hearing loss. 2.

  • Page 4: How To Use

    NOTE mark When the sleeve does not become loose any further, Push button fix the side handle to the sleeve. Then, strike the grip of the side handle to the left in order to loosen the sleeve,while holding the ring by hand (Fig. 2). Sleeve mark Fig.

  • Page 5: Maintenance And Inspection

    Code No. No. Used Remarks CAUTION Repair, modification and inspection of Hitachi Power Tools must be carried out by a Hitachi Authorized Service Center. Stopper This Parts List will be helpful if presented with the Speed tool to the Hitachi Authorized Service Center when control dial requesting repair or other maintenance.
  • Page 8 Hitachi Koki Co., Ltd. Shinagawa Intercity Tower A, 15-1, Konan 2-chome, Minato-ku, Tokyo, Japan Code No. C99126411 G Printed in China...

Table of Contents