A wrench or a key left attached to a rotating part GENERAL SAFETY RULES of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance WARNING! at all times. Read all instructions This enables better control of the power tool in Failure to follow all instructions listed below may result in unexpected situations.
4. When boring concrete or similar hard materials in PRECAUTIONS ON USING IMPACT DRILL IMPACT mode, set the bit rotation switch lever to the R-side. (Fig. 8) 1. Wear ear protectors with impact drills. 5. Avoid tightening work of screws, bolts, and nuts; Exposure to noise can cause hearing loss.
When switching off, the D : Remarks stopper can be disconnected by pulling the trigger CAUTION again. Repair, modification and inspection of Hitachi Power CAUTION Tools must be carried out by an Authorized Service Drill at a maximum rotation speed when drilling Center.
Page 12
NOTE Due to HITACHI’s continuing program of research and development, the specifications herein are subject to change without prior notice.
Page 14
服務中心 日立工機商業(中國)有限公司 上海市長寧區遵義路100號 虹橋上海城B棟2686-2689室 秶婖妀 制造商 廣東日立工机有限公司 廣東省廣州市番禺區庈 Hitachi Koki Co., Ltd. Code No. C99104722 G Printed in China...