BCM Advanced Research MX45GM User Manual

BCM Advanced Research MX45GM User Manual

Intel core2 quad / intel core2 duo / intel celeron socket p processors support

Advertisement

Quick Links

Intel
Core™2 Quad / Intel
®
User's Quick Start Card

Inspect the Package:

One
MX45GM Motherboard
One
CPU Cooler
One
Standard I/O Shield
One
PS2-Y Cable
One
SATA Power Cable
Two
SATA Cables
Two
Serial Cable
One
Driver CD
One User's Quick Start Card
Responsibility:
This manual is provided "As-Is" with no warranties of any kind, expressed or implied, including, but not limited to the implied
warranties or conditions of this product's fitness for any particular purpose. In no event shall we be liable for any loss of
profits, loss of business, loss of data, interruption of business, or indirect, special, incidental, or consequential damages of
any kind, even the possibility of such damages arising from any defect or error in this manual or product. We reserve the
right to modify and update the user manual without prior notice.

WARNING: CMOS Battery Damage

Replace your system's CMOS RAM battery only with the identical CR-2032 3V Lithium-Ion coin cell (or equivalent) battery
type to avoid risk of personal injury or physical damage to your equipment. Improper installation might cause battery to
explode. Always dispose of used batteries according to the manufacturer's instructions, or as required by the local
ordinance (where applicable). The damage due to not following this warning will void your motherboard's manufacturer
warranty.
Perchlorate Material- Special Handling May Apply.
See
http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
Additional Information:
Additional information on setting this board up can be found in the User's Manual in the provided CD or DVD ROM. The
Online User's Manual and FAQ/Knowledge Base can be found on our website by visiting our website:
http://www.bcmcom.com. If your question is not answered in our FAQ/Knowledge Base, visit our forums and post your
messages or submit a new FAQ through FAQ Submittal form for us to add your question in our FAQ with our answer.
ATTENTION: Incorrect BIOS Setup
If you do not know how to handle BIOS setup or how to set it up properly, it is strongly advisable that you do not modify any
of the settings than otherwise instructed in the User's Quick Start Card. Even a seemingly small incorrect adjustment or
modification in the BIOS setup can render your system unstable or unusable. Incorrect BIOS setup is not covered by your
motherboard's manufacturer warranty. Try Clear CMOS information when system does not boot after BIOS settings
change.
MX45GM
P
Socket
Processors Support
Version 1.2
MX45GM
Core™2 Duo / Intel
®
CPU Cooler
SATA & Power cable
Celeron
®
http://www.bcmcom.com
PS2-Y cable
I/O Shield
COM Port
Cable

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MX45GM and is the answer not in the manual?

Questions and answers

Summary of Contents for BCM Advanced Research MX45GM

  • Page 1 Celeron ® ® ® Socket Processors Support User’s Quick Start Card http://www.bcmcom.com Version 1.2 Inspect the Package: MX45GM Motherboard CPU Cooler PS2-Y cable Standard I/O Shield CPU Cooler PS2-Y Cable SATA Power Cable SATA Cables I/O Shield Serial Cable Driver CD SATA &...
  • Page 2 WARNING: Electrostatic Sensitive Device (ESD) Static electricity can easily damage your motherboard and will void your motherboard warranty. Keep the motherboard and other system components in their anti-static packaging until you are ready to install them. Touch a grounded surface before you remove any system component from its protective anti-static packaging.
  • Page 3 • Serial Port (COM2, COM3, COM4, COM5) Signal Signal DCD# DSR# RTS# CTS# DTR# RI#(COM2 _PWR) DCD# DSR# RTS# CTS# DTR# • System Panel (F_PANEL1) Signal Signal HD_LED+ PWR_LED+ HD_LED- PWR_LED- PWR_BTN+ PWR_BTN- [KEY] • Digital IO (JDIO1) Signal Signal SMBDATA SMBCLK DIO17...
  • Page 4 • LVDS (JLVDS1) Signal Signal +12V +12V LVDS1_CLKN LVDS0_CLKN LVDS1_CLKP LVDS0_CLKP LVDS1_N3 LVDS1_N2 LVDS1_P3 LVDS1_P2 LVDS1_N1 LVDS1_N1 LVDS1_P1 LVDS1_P0 LVDS0_N3 LVDS0_N2 LVDS0_P3 LVDS0_P2 LVDS0_N1 LVDS0_N0 LVDS0_P1 LVDS0_P0 SC_DDC SD_DDC +3.3V +3.3V • LCD Inverter (JBKL1) Signal ENBKL +12V...
  • Page 5 • Serial SATA (SATA1, SATA2, SATA3, SATA4) Signal SATA_RXN SATA_RXP SATA_TXN SATA_TXP • Serial SATA Power (SATA_POWER1, SATA_POWER2) Signal Signal +12V • CPU Fan (CPU_FAN1) Signal SENSE POWER PIN • System Fan (SYS_FAN1) Signal SENSE POWER PIN •Chassis Intrusion (CHASSIS1) Signal +5VSB [KEY]...
  • Page 6 Jumpers • Clear CMOS Jumper (CLRTC1) Normal (Default) Clear CMOS • COM1, 2 RI/+5V/+12V Jumper (JCOMPWR2, 3) JCOMPWR2,3 Ring (Default) +12V...
  • Page 7: Motherboard Layout

    Motherboard Layout: LAN_USB2 LINE-IN 19V DC-IN COM1 LAN_USB1 LINE-OUT HDMI PS2 KB/MS JCOMPWR3 AAFP1 JAMP1 JLVDS1 SPDIF OUT SYS FAN1 JBKL1 PCI 1 SPI1 USB1, 2 SODIMM1, 2 CLRTC1 CPU FAN1 COM 2, 3 SATA1-4 COM 4, 5 JDIO1 F_PANEL1 CHASSIS1 JPCIE X1 MINI_PCIE1...
  • Page 8: Cpu Installation

    CPU Installation This processor is intended to be professionally installed. Take proper electrostatics discharge (ESD) precautions such as using appropriate ground strips, gloves, and ESD mats. • Insert CPU into CPU socket and turn the screw to the lock position. Lock Unlock Gold triangular...

Table of Contents