A3 Laminator 1. Intended use This laminator is intended exclusively for use in priva- te households and for the hot and cold lamination of documents printed on paper or cardboard. Additionally, the documents can be trimmed. It is NOT intended for use with any other materials.
Although the laminator satisfies all predominant safety norms and standards, errors can never be completely discounted - as with all electrical ap- pliances. Errors with the laminator can result in damage to the document being laminated. • Do NOT laminate any document which, together with the laminating pouch, would have a thickness of more than 1,0 mm.
For cold lamination, use only laminating pouches that are expressly designated for cold lamination. Take note that the laminating pouches in- cluded with the laminator are intended exclusively for hot lamination. 7. Operating levels Position of Position of...
➩ Fold out the document supports documents can be pulled in straight into the slot for manual foil feed ➩ Insert the plug of the laminator into a mains power socket. ➩ Provide a firm location for the appliance. ➩...
125 microns. Ensure there is at least 45 cm of open space in front of the laminator. If you do not, the laminating pouch will not be completely ejected from the laminator after lamina- tion. This could damage the laminated pouch.
➩ Cleaning the interior of the appliance: With every lamination, contaminants are deposited on the rollers inside the laminator. Over time, this re- so that it forms duces the performance of the laminator. You should therefore clean the rollers inside the laminator after to the end stop (the use.
Repeat this cleaning process several times. Use a fresh clean sheet of paper each time. When you no longer see any contaminants on the paper, the rollers inside the laminator are clean. 14. Storage Allow the appliance to cool down completely before putting it into storage.
Need help?
Do you have a question about the A3 LAMINATOR ULG300A1 and is the answer not in the manual?
Questions and answers